Search Samsung

Looking for Answers about samsung 4.3 cu. ft. Steam Washer?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:2)
Dishwashers(Q:16 A:25)
Dryers(Q:44 A:55)
Electric Ranges(Q:85 A:112)
French Door(Q:3 A:4)
Gas Ranges(Q:98 A:126)
Induction(Q:6 A:9)
LED Lighting(Q:2 A:3)
OTR(Q:117 A:171)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:41 A:74)
UHD TV(Q:64 A:56)
Verizon Wireless(Q:109 A:125)
Washers(Q:25 A:37)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category
Most Recent Questions
Recent Question:
DO I NEED TO LEAVE THE WASHER DOOR A LITTLE OPEN TO AVOID ANY ODORS ?
Recent Question:
Has anyone had issues with water not draining out of bleach dispenser after wash is done?
Recent Question:
Is there any way to reverse the door on this washer?
Questions with Most Recent Answers
Question:
DO I NEED TO LEAVE THE WASHER DOOR A LITTLE OPEN TO AVOID ANY ODORS ?
Question:
Has anyone had issues with water not draining out of bleach dispenser after wash is done?
Question:
Is there any way to reverse the door on this washer?

Customer Questions & Answers for
4.3 cu. ft. Steam Washer

Customer Questions & Answers:
41 Questions
 | 
51 Answers
Overall Rating:
4.571 out of 5
4.6
out of
5
(21 Reviews)21

Questions & Answers for samsung 4.3 cu. ft. Steam Washer

Question

what does error code nF mean on my washer?

this error shows on all cycles
asked 3 years, 6 months ago
beaucefus
Orange, CA
on 4.3 cu. ft. Steam Washer
-1point
0out of 1found this question helpful.
1 answer
Answers
answer 1
The nF error code means that the washer has tried to fill but was unsuccessful. Please make sure the water valves are turned on all the way, there are no bends or kinks in the water line that could be obstructing water flow, and clean the inlet screens on the fill hoses. If the problem persists, your WF419 may require service. To initiate service through Samsung, please submit an online service request through the link below, or call 800-SAMSUNG to speak with an agent who will be happy to assist you.

Online service request form: http://www.samsung.com/us/support/o...

- Ms. Samsung
answered 3 years, 6 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

How do I remove the pedistal drawers to clean under the machine?

asked 4 years, 11 months ago
Anonymous
Nebraska
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
PULL THE DRAWER OUT AS FAR AS YOU CAN THE LOOK ON EACH SIDE YOU WILL SEE 2 SCREWS THAT ATTACHED THE DRAWER TO THE SLIDER BARS (SILVER TIP SCREWS) UNSCREW REMOVE DRAW. REVERSE FOR INSTALL UPON INSTALL YOU MAY HAVE TO HOLD THE SLIDER IN POSITION AS YOU PUT DRAWER BACK IN JUST GO SLOW.
answered 4 years, 5 months ago
HAPPYSHOPPER
NIAGARA FALLS NEW YORK
0points
0out of 0found this answer helpful.
answer 2
To remove the pedestal drawers, follow these steps: Open the pedestal drawer. Locate the 2-3 Phillips head screws toward the front of the track on each side. Remove the screws from each side, then lift and pull the pedestal off the track.

- Ms. Samsung
answered 4 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

How do I remove standing water in my detergent tray that won't drain

I have a brand new WF419AAU Washer. I have done maybe 10 loads and all of a sudden I have standing water in the detergent tray. It's actually in the two trays to the right of the detergent tray. There always was residual water in this area after a wash cycle but now there is standing water to the top that sloshes out when I open the drawer. What can I do to have this drain properly? Please help!
asked 4 years, 8 months ago
rhusslage
Boston
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
PULL THE TRAY OUT AND INSPECT FOR CLOG FROM DETERGENT BOTTLE OR SOFTNER. YOU MAY HAVE A SMALL PIECE OF CLEAR WRAPPER OR CAP SEAL BLOCKING FLOW. THE GUTS OF THE TRAY COME OUT JUST BE CAREFULL. AFTER IT IS OUT YOU WILL BE ABLE TO CHECK THE DRAIN HOLES VISUALLY IT IS ONLY GRAVITY DRAINED SO THERE IS NO ELECTRONIC BREAKAGE YOU'LL BE FINE
answered 4 years, 5 months ago
HAPPYSHOPPER
NIAGARA FALLS NEW YORK
0points
0out of 0found this answer helpful.
answer 2
I'm sorry to hear you're having this issue. Most likely your washer has become unlevel since you started using it, and is now tilted slightly forward. This can happen if the leveling legs were not locked in place when it was initially installed. Over time, vibration can cause the legs to become unlevel again if they are not locked in place. Please follow this link to the instructions for correcting this issue: http://tinyurl.com/yjj6wqa

- Ms. Samsung
answered 4 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

What is the length on the normal cycle

asked 4 years, 5 months ago
Anonymous
44236
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
THE NORMAL WASH LOAD WITHOUT SILVER OR STEAM ON MY 448 IS 55 MIINUTES REMEMBER THAT THE MACHINE SENSES VARIABLES AND MAY ADJUST ACCORDINGLY EXAMPLE MY WATER PRESSURE IN MY HOME MAY BE MORE THAN YOURS CAUSING TIME DIFFERENCES OR SOFT WATER COMAPERED TO HARD SILVER TENDS TO ADD ABOUT 5-6 MINUTES TO ANY LOAD
answered 4 years, 5 months ago
HAPPYSHOPPER
NIAGARA FALLS NEW YORK
0points
0out of 0found this answer helpful.
answer 2
The estimated duration of the Normal cycle on the WF419AAU is 58 minutes. Actual time may vary depending on several factors, including water pressure, size of load, amount and type of detergent which can effect the amount of suds and need for additional rinse time.

For more information, please refer to the Cycle Chart below, which can also be found on page 28 of the User Manual.

Thanks for your interest!
Ms. Samsung
Image(s)
User submitted image
answered 4 years, 5 months ago
MsSamsung
SamsungHQ
+1point
1out of 1found this answer helpful.
Question

Explain your product specifications

Under your specifications for the WF219ANB washer, next to "Whites" and "Towels" you state: "NO".
What does that mean? I'd be concerned if it meant the product cannot handle washing whites or towels.
asked 4 years, 5 months ago
Anonymous
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
To which specifications do you refer? Certain cycles are not recommended for whites and towels, they have their own, individual cycles. No problems with whites, towels, liquid bleach (clorine or color safe). My whites have never been whiter, my towels have never been fresher.
answered 4 years, 3 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
Thank you for the question. I can understand your concern, but please rest assured that all Samsung washing machines do an excellent job washing both whites and towels, as well as a variety of other types of items. Each model offers a set of preprogrammed cycles, which are selected based on customer feedback from previous models and other sources. The WF219 does have preprogrammed cycles for Whites and Towels, and the specifications page on the website reflects this fact by indicating "Yes" next to those cycles. The WF419, however, does not have those particular cycles preprogrammed, which is why the specifications for that model states "No" next to those cycles. This does not mean the WF419 is any less capable of washing those types of items; it simply means there are other cycles that are preprogrammed on the WF419 which are equally suitable, such as the "Heavy Duty", "Sanitize" or "Bedding", to name a few. Since the WF419 has more features than the WF219, Samsung chose to reduce redundancy of certain preprogrammed cycles in order to add cycles like Deep Steam while maintaining the user-friendliness of the controls.

Meet My Cycle: If you don't find a preprogrammed cycle that suits your particular wash load, then you also have the ability to select whichever combination of water temperature, spin speed and soil level, along with other available options, and store it as "My Cycle" for one-touch selection on future loads.

A note about capacity: The 4.3 cubic foot WF419 fits a lot of towels - three more than the WF219, which does have the preprogrammed "Towel" cycle! In addition, the WF419 has the internal water heater and Steam feature, both of which are great at getting whites their whitest.

I've attached a copy of the WF419 Cycle Chart, which can also be found on page 28 of the User Manual, for more information on the different cycles and options available.

I hope this helps to clarify and put your mind at ease!
Ms. Samsung
Image(s)
User submitted image
answered 4 years, 5 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

why are my towels so rough after cycle

I have tried using he powder and liquid soaps with no better results. My old wash/dryer did not have the results of rough towels.
asked 4 years, 4 months ago
monacokid
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Try the wrinkle prevent and steam cycles. My 100% cotton towels come out soft every time.
answered 4 years, 3 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
If your towels are rougher now than they were with your previous washer, and your previous machine was a toploader (not an HE model), then you may be using too much detergent, or not HE detergent. It is important to use the correct amount of HE detergent with frontloaders due to the low water use. Too much detergent, or the use of non-HE, can prevent the towels from rinsing thoroughly which may cause them to feel rough. Besides adjusting the detergent use, I would suggest selecting the "Extra Rinse" option on the controls to help ensure the maximum amount of detergent and suds are extracted from your towels.

Thank you for the question.
- Ms. Samsung
answered 4 years, 4 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Lowes stated samsung is deleting the 419 Steam Series and replacing with something else we were ready to purchase

Not sure of the future of this product.

Please advise

Dan
asked 4 years, 7 months ago
Anonymous
Saint Paul, MN
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
GO TO SAMSUNG.COM THEY HAVE ALOT OF NEW MODEL NUMBERS AND ONES THAT ARE NO LONGER YOU CAN COMPARE ON THEIR SITE TOO WHICH I RECOMMEND.... AFTER ALL MY RESEARCH AND WEIGHING I TOOK THE 448 IN WHITE AS DOLLAR FOR DOLLAR (AND THE SALE PRICES ON LINE I FOUND) IT WAS A BETTER DEAL WHETHER OR NOT I WILL USE ALL THE FEATURES IS ANOTHER MATTER BUT I DO USE SILVER ALMOST EVERYLOAD. ITS LIKE DRIVING A FERRARI JUST BECAUSE YOU GOT THE POWER DOESNT MEAN YOU GOTTA USE IT ALL THE TIME OR THATS ITS WASTED JUST BECAUSE YOU KEEP YOUR FOOT OUT OF IT.
answered 4 years, 5 months ago
HAPPYSHOPPER
NIAGARA FALLS NEW YORK
0points
0out of 0found this answer helpful.
answer 2
Like most manufacturers, Samsung periodically transitions models to ensure the full line-up has an appropriate selection of features, colors and pricepoints to appeal to a diverse group of customers. The 419 laundry pair is one of the newer additions to Samsung's line-up, and is among the most efficient full-size washers currently available, according to Energy Star. Other great features include Samsung's signature Vibration Reduction Technology, ActivFresh to keep your clothes and the machine fresh-smelling without bleach and hot water, and Steam in both the washer and dryer for stain-fighting and wrinkle removal. In addition, both the WF419 and the DV419 are part of an award-winning line up of Samsung products that earned the JD Power & Associates Overall Customer Satisfaction Award for Washers (2009) and Dryers (2008-2009). I can't speak to our retail partners' future plans for any particular model, but I do want to reassure you that the 419s would be an excellent choice, as would any other model in our line up. Thank you for your interest in Samsung.

- Ms. Samsung
answered 4 years, 6 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

The chimes no longer work on my washer, any suggestions?

asked 3 years, 8 months ago
s2318l
18707
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
there is a signal button on the keypad that silences the chimes.
answered 3 years, 6 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
I'm sorry to hear the chime is not working on your WF419. Please try cycling the power to the washer by unplugging then plugging it back in, or turn the circuit breaker off then on again. Make sure the Child Lock is not activated, and press the Signal On/Off button on the control panel. If your chime still doesn't work, service may be required to repair it. Please call 800-SAMSUNG to speak with an agent who will be happy to assist you further.

Thank you,
Ms. Samsung
answered 3 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

I don't feel there is enough water being used. Is there any way for me to adjust the amount of water?

It takes many minutes for all the clothes to become wet and I don't feel my clothes are getting clean enough. We are using softened water.
asked 3 years, 7 months ago
Cybil
South Carolina
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
i would definately check on the water pressure of the faucets feeding water to the washers, and would look into possibly reinstalling or double checking your installation. my clothes become soaked after just a few spins. good luck.
answered 3 years, 6 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
The WF419 automatically adjusts the water level based on the weight of the laundry and cycles selected, using from 13 to 15 gallons of water per cycle. Samsung front load washers do not have a manual water level adjustment. To determine whether your washer is filling with the appropriate amount of water, and how to troubleshoot if it is not, please follow this link, then select Operation ► There is No Water Or Not Enough Water: http://support-us.samsung.com/cyber...

Thank you,
Ms. Samsung
answered 3 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Can I use Steam Only function for the WF419 Steam washer?

I would like to use Steam Only function for clothes that are in the closet.
Is there a special code that I can enter?
asked 3 years, 7 months ago
NewRook
San Jose, CA
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
the feature you are looking for would be the steam cycle in the matching samsung steam dryer. the only reason the washer uses steam is for deep cleaning along with water. the dryer's steam cycle would be used to "refresh" clothes that are clean but have been stored for a while. hope this helps.
answered 3 years, 6 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
The steam cycles on the WF419 washer are designed to be part of wash cycles and are not available as "steam only". The steam dryers, including the DV419, do have Steam Refresh and Steam WrinkleCare cycles, however, which are ideal for refreshing or removing wrinkles from clothes that have been in storage.

Thanks for the question,
Ms. Samsung
answered 3 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

When washing on normal a lock appears on the soil lovel low - why?

I cannot find the icon for the lock in the manual
asked 3 years, 7 months ago
grtwise1
tucson arizona
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
if you press the spin and soil level buttons at the same time, this will engage the child lock feature (see the image of the child's face with arrows pointing just below both buttons). you may be pressing both at once without realizing. hope this helps.
answered 3 years, 6 months ago
NorthAlabama
Huntsville, AL
0points
0out of 0found this answer helpful.
answer 2
If you're referring to the icon that looks like a padlock, this indicates when the door is locked. To disengage the lock during the cycle, press the Start/Pause button. Press the Start/Pause again to restart the cycle once the door is closed. There are certain times that the door cannot be unlocked, such as when the temperature is too hot (during Sanitize) and when the drum is spinning.

Thank you,
Ms. Samsung
answered 3 years, 7 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Why do the cycles take so much longer than what it says on the display? It takes a cycle twice as long as what it originally says on the display.

asked 4 years, 8 months ago
Anonymous
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I'm sorry to hear you're having this issue. There are several factors that could result in extended wash times, including low water pressure, improper leveling of the machine, and too much detergent or non-HE detergent being used.

Water pressure should be between 20 and 120 psi for the WF419AAU to operate properly. If the pressure is too low, it could take a long time for the washer to fill, or it could trigger the machine's safety mechanism which helps to prevent water damage from leaks, and shut off entirely.

Please click here for a link to the WF419AAU Troubleshooting page on Samsung's website for further explanation, and tips to correct the leveling and detergent scenarios: http://support-us.samsung.com/cyber... If, after trying these corrections, you continue to experience this issue, please contact Customer Care at 800-SAMSUNG for additional assistance.

- Ms. Samsung
answered 4 years, 8 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Does any one have problems with the liquid bleach dispenser??

I've had the washer and dryer combo for nearly three months now. I'm on well water and noticed a very big problem when I use liquid bleach, some of my clothes have come out stained and ruined. I have already had a service man come to the house and he wasn't sure on how to fix the problem, he felt it was a defect with the bleach dispenser.
This has been the only issue that needs to be solved and I would like some expert opinion. I've added liquid bleach and liquid soap in the dispenser and start the wash process. After the machine has made several turns then I will add clothes into the drum. I feel the mixes the bleach into the water so the clothes cannot get stained by the bleach. Doing this one of the problems I feel this may encounter is that the machine has already went through the load sensor feature and it doesn't measure up for the clothes for the amount of water it requires. I tried using liquid color safe bleach but it does do the job like liquid bleach for my family's clothes especially during these hot summer days.
Please give me some advise on this problem.
asked 4 years, 2 months ago
Darby
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I'm sorry to hear you're having problems using bleach with your WF419 washer. The detergent, bleach and fabric softener dispensers are designed to release their contents into the washer at the ideal times, after water has already been added. Bleach is added at a different point in the cycle than the other products to optimize the stain fighting of each product.

If bleach is being added to your garments directly and undiluted so it is causing bleach stains, I would suggest calling 800-SAMSUNG to speak with an agent who can help you confirm that you have the current dispenser siphon cups in place. Once that is confirmed, please make sure you are filling the bleach cup no further than the "MAX" line. I would also check to be sure the machine is properly leveled, since tilting either forward, backward, or to one side could effect the ability of the dispenser to contain then release its contents properly. Additionally, checking the water inlet hoses and screens will confirm that the proper amount of water is entering the dispenser area to dilute and flush the contents into the wash drum.

If you continue to experience this issue after checking each of these suggestions then your washer may require service. Arranging service through Samsung will help to ensure continuity and thorough tracking of your service issues through the serial number of your unit. To initiate service through Samsung, please submit an online service request through the link below, or call 800-SAMSUNG to speak with an agent who will be happy to assist you.

Online service request form: http://www.samsung.com/us/support/o...

Thank you,
Ms. Samsung
answered 4 years, 2 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

What is the spin RPM rating?

Spin RPM rating would be helpful to compare models.
 
Products related to my question
25.5 cu. ft. French Door Refrigerator
 
 
 
 
 
asked 4 years, 7 months ago
Trebor2
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
The maximum spin speed on the WF419AAU is 1200 RPM. Though not listed on the Specifications tab, this information is available on the Features tab, as well as on the downloadable PDF of product specifications, in the event you'd like to compare to other models. I'll be sure to pass along your suggestion, however.

Thank you for considering Samsung!
- Ms. Samsung
answered 4 years, 6 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

long term storage

other than replacing the bolts for transport, what precautions need to be taken prior to long term storage. Do I need to run bleachwatrer only thru the machines cycles?
asked 4 years, 3 months ago
Anonymous
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your washer for storage as follows:
• Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your washer through the cycle without a load.
• Turn the water faucets off and disconnect the inlet hoses.
• Unplug your washer from the electrical outlet and leave your washer door open to let air circulate inside the tumbler.
• If your washer has been stored in below–freezing temperatures, allow time for any leftover water in your washer to thaw out before use.

Thank you for the question,
Ms. Samsung
answered 4 years, 3 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Where can I get replacement "GUIDE-LIQUID(M)" ?

Part #DC61-02472A
for Model WF419AAU/XAA
asked 3 years, 9 months ago
karchme2
Scottsdale
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
For information and availability of Samsung parts and accessories for your WF419AAU, please visit SamsungParts.com or call 800-627-4368 to speak with an agent who can assist you.

Thank you,
Ms. Samsung
answered 3 years, 9 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

My Samsung VRT front load washer is two weeks old and is giving me FF error. Please help.

asked 3 years, 9 months ago
cfehlis
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I'm sorry to hear you're having an issue with your WF419AAU. The code "FF" is not listed in the manual, so will require service to properly diagnose and troubleshoot the issue. To initiate service through Samsung, please submit an online service request through the link below, or call 800-SAMSUNG to speak with an agent who will be happy to assist you.

Online service request form: http://www.samsung.com/us/support/o...

- Ms. Samsung
answered 3 years, 8 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

why does my washer shut off when it gets to spin cycle?

we have barely had the washer a month and last week the washer started shutting off when it gets to spin leaving the clothes soaking wet. when we try to just run the spin cycle the washer will power off and will not power on for 30 seconds or more. and as of last night it seems to be doing this every time. so we have a brand new washer that will not do it's job and your online chat isn't working nor is anybody answering when i call the given number great customer service.
asked 3 years, 9 months ago
jlc400ex
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I'm sorry to hear you're having an issue with your WF419AAU. I would suggest visiting the online Troubleshooting Guide which may be able to help you resolve this issue without service. Please click on the link below, then select "Operation" then "Washer Stops" or "Washer Doesn't Drain or Doesn't Spin at All": http://support-us.samsung.com/cyber...

Both of these articles may be relevant to your situation. If the solutions offered do not resolve the issue, please use the service request link at the bottom of the page for further assistance.

Thank you,
Ms. Samsung
answered 3 years, 8 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

How do I swap Door side

asked 3 years, 9 months ago
smileybaer
Lancaster, MA
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Like most front load washers, the door on the WF419AAU opens from right to left and cannot be reversed to open from left to right because of the location of the door lock. The dryer doors, however, are reversible.

Thank you for the question,
Ms. Samsung
answered 3 years, 9 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

should you see water in the washer while a cycle is going?

asked 3 years, 9 months ago
Superman1
on 4.3 cu. ft. Steam Washer
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Thank you for the question. It's not unusual for water to not be visible, partially because of the low water use of this and other front load machines, and partially because of Samsung's drums being tilted toward the back. To determine whether the water is at the appropriate level in your machine, please click on the following link, then select "Operation" > "There is No Water Or Not Enough Water": http://support-us.samsung.com/cyber...

This article also includes the troubleshooting tips for addressing a low-water level.

Thank you,
Ms. Samsung
answered 3 years, 8 months ago
MsSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
1 2 3 next>>
Copyright © 1995-2014 SAMSUNG All rights reserved.