Looking for Answers about samsung Ultra-Portable LED Projector?

I would like to use 2 SP-H03 projectors to show 3D movies. Do you have any sujestions as how to go about setting up and if any additional software is needed? I already have the projectors.

I have gone step by step with the directions, yet nothing appears on the projector other than a picture and message about being connected by USB. I dropped and dragged items into the system, and tried to play it without being hooked to my laptop but it keeps telling me to check my signal cable and my audio cable. What am I doing wrong?

My samsung pico will not display all jpeg files. When I go to open the photos in photo mode it recognises that they are picture files however the thumbnails are question marks. When I click to open them it gives a message saying file format not supported. Can you please help?

Where is the area to download the firmware. The disk that came with it is unusable.
What format types does it support? Pdf, doc, jpg, powerpoint?

Samsung model SP-H03

It was running fine on the battery for the first day, but then the power got low and it would not start anymore. So I plugged it in, the light was red and charged it overnight, the light turned blue during the night But now it will not start without plugging it in. If I plug it in, it boots up and works fine, the light is red but it never recharges. If I turn it off the light turns blue after about 3 secs Indicating it is fully charged. If I try to start it without the power supply it tries and then immediately fails. I can't seem to get it to recharge.

When plugged in to the wall the unit shows a blue light, indicating fully charged. When started it is fine and the light stays red all the time. When disconnected the unit will not start, trying but failing immediately, the light flashing blue, red, blue, red, blue/red and then dead. If I plug it in again it starts fine.

The documents for SP-H03 state that its native resolution is 854x480. EDID information for it only has one widescreen resolution, namely 1280x800, which it implements by resampling. What are the modelines for feeding SP-H03 with its native resolution? Are there plans to update EDID to allow native resolution?

what am i missing, I've tried charging with or without power (projector) on

after charging blue light is on but if i try to power up the projector tries to illuminate then the light goes red.

tried econo mode still doesn't work

otherwise this is a great product. rocks!

I have a macbook pro and just recently bought a sp-h03 and it isn't recognized via usb when connected on my mac. Are there any drivers or updates coming?

Since the case only holds the projector and battery I have been keeping the VGA, USB and AV cables in a separate pouch. Unfortunately I have lost it and now have no way of connecting the projector to my laptop or DVD.

I have inserted an 8GB Micro SD into the slot and the projector appears to recognise it. But when I plug the projector into my PC via USB it only allows me to copy files to the projector's internal memory, not the Micro SD. Should I be able to do this, or do I need to purchase a Micro SD reader for my PC and copy the files independantly of the projector?

I have a problem with connected AV sources to the SP-H03. I connected some movie's to the AV from camera - Some Movie I film/ Some from the internet. The sound from the speaker or from Headphones, connected to the SP-H03, is not out at all if the sound level is not high enough. So if in the movie there is environment sound, like pepole talk or car sound near by, the SP-H03, all at once, stop out the sound. The sound will return only if the car will be near or the sound level will be high more in some threshold level. In such manner I and the people can not enjoy the movie or the presentation I do not
seem good at all.
What next? I can not continue like that... Q: My own SP-H03 have a problem? I need to do Software Upgrade ? How I solve that problem ?

Every time the SP-H03 is powered up, not only do you have to activate the unit with the power switch, but are then stuck in the input source menu. Why can't the unit be configured to just run a stored video or power point? The settings page doesn't allow me to set much of anything. Can I send it commands via the USB interface? I'd like to run the projector only from an AC power source, and I'd like to automatically switch on and run as last configured.