Search Samsung

Looking for Answers about samsung ML-1210?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:2)
Dishwashers(Q:17 A:26)
Dryers(Q:44 A:55)
Electric Ranges(Q:86 A:113)
French Door(Q:3 A:4)
Gas Ranges(Q:98 A:126)
Induction(Q:6 A:9)
LED Lighting(Q:2 A:3)
OTR(Q:118 A:172)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:41 A:74)
UHD TV(Q:65 A:57)
Verizon Wireless(Q:109 A:125)
Washers(Q:25 A:37)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category
Most Recent Questions
Recent Question:
Configuration for Google Cloud Print
Questions with Most Recent Answers
Question:
Configuration for Google Cloud Print
See all Samsung Questions and Answers Black and White Laser Printers Q & A

Customer Questions & Answers for
ML-1210

Customer Questions & Answers:
19 Questions
 | 
3 Answers

Questions & Answers for samsung ML-1210

Question

What can be done when a ML1210 printer can't pick up the paper? Do the rollers need cleaning? How do you clean, if so.

asked 3 years, 9 months ago
ML1210
USA
on ML-1210
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
I have this printer and had this problem when it was given to me. I read around online and found out that it's because the rollers have been used so much (since obviously it's old) that the rubber is too smooth to pick up the paper. I did some operating on mine that I don't remember well enough to explain (lots of parts to take out, but you can get them all back in if you keep the order straight), but you just want to get to the rubber rollers. The trick is to take them off, turn them inside out, and put them back on. It's a little tough to get them inside out, you just have to be creative. Then you have a whole new surface with plenty of friction.
My printer has worked like a charm ever since then, printing faster than most printers I see despite it's age. Good luck!
answered 3 years, 9 months ago
Searose
Tucson AZ
+1point
1out of 1found this answer helpful.
answer 2
put a little spit on the lead edge of paper where it pick up the paper
answered 3 years, 9 months ago
Karldominguez
Austin TX
0points
0out of 0found this answer helpful.
Question

How to clear memory? I ran a print job that ran out of paper. after adding paper the paper barely stared to feed before stalling

Trying to continue printing after running out of paper an error light came on. No paper is in the path trying the other paper source route or trying to print using the demo button produces the same result I've unplugged an replugged the printer. I've cleared the que. Printer Behavior suggets that the may be a problem stored in memory. any attempt to print seems to involve an attempt to get data then a brief start of the paper feed which barely moves the paper before the error light comes back on.
asked 4 years, 1 month ago
sekagle
on ML-1210
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
it is in the owner manual
answered 3 years, 9 months ago
Karldominguez
Austin TX
0points
0out of 0found this answer helpful.
Question

Even though I installed a new toner cartridge, my printer does not print. I get only blank pages. Can you offer any suggestions?

asked 4 years ago
JackD59
Raleigh, NC
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Can you help with a printer sharing problem?

Hi! I have an ML-2010 which used to be connected to a computer with XP Professional, and shared on a network with a netbook (XP Home) and a laptop (XP Professional), with no problems. The printer has been moved to a new Windows 7 computer. The netbook and laptop can add the shared printer, but can not print to it. When printing a test page from printer properties, Windows Explorer crashes on the laptop or netbook. Sometimes a "Test Page" job shows in the printer status on both the client PC and the Windows 7 PC, with status of "spooling" on the Windows 7 PC, but nothing prints. Behavior is identical on both the laptop and netbook. The netbook can print to the printer when the printer is directly connected to the printer. Any suggestions? The printer on the Windows 7 computer has been tried with client rendering both enabled and disabled. Help! and thanks in advance.
asked 4 years ago
RoboGeek
home
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

can the ML-1210 be connected through USB port?

i downloaded universal driver but error message says "the port is not connected" even though it recognized the printer and applied the driver successfully
asked 3 years, 11 months ago
pgoitia
on ML-1210
+1point
1out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Where can I buy a converter cable for my ml-1210 to make it a usb connection?

asked 3 years, 9 months ago
amanring
kenosha, wisconsin
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

can i replace the roller?

A piece of the roller on the left end broke off so everytime I print the paper is bent on that side. The printing is OK but every page is bent.
asked 3 years, 9 months ago
cakhhz
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

ml-1210 - Printing some garbage stuff on my page.

i had a paper jam - I cleared it by just pulling the paper out - now I'm see some garbage on my printed page. How I can I correct this.
asked 3 years, 8 months ago
tonylc
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

printer won't print after installing Mac 10.6

The print dialogue box says printer is offline, though it's plugged in and connected to computer. Driver info says driver cannot be changed and identifies driver as GDI for Jaguar 2.0 Printer was working fine with 10.4
asked 3 years, 8 months ago
Lynn64
Carbondale IL USA
on ML-1210
+1point
1out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

My printer is printing leading and trailing blank pages.

Is there a setting to stop printing these pages. The only thing on the pages is a header and a footer.
asked 3 years, 6 months ago
rstauts
Homestead, FL
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Windows 7 driver for ML-1210

Neither of the drivers available on your website for Windows 7/ML-1210 will work. Both of them crash the print spooler. I have a driver for my other printer - CLX-2160 which works fine on W7 so it is not a problem with the Windows 7 installation. Any ideas?
asked 3 years, 5 months ago
Richard35235
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Will my ML 1210 work with Windows 7 64 bit operating system?

asked 3 years, 4 months ago
RadioDude
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Will your Samsung printer ML-1210 work with Windows 7?

asked 3 years, 2 months ago
hsedwards
on ML-1210
-1point
0out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

for printer ml-1210, How can the default values be changed and stored e.g. Page margins and landscape, portrait???

asked 3 years, 2 months ago
wejorgy
livermore
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

ML-1210 Manual Download?

asked 3 years, 2 months ago
jpanger
Ohio
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

What is the remote control program code for BD-D5100 Blu Ray Dvd Player?

I'd like to program my universal remote control to control my BD-D5100 BluRay DVD player. Can you tell me what the code is that I need to program the remote to communicate with the player? Thanks you!
asked 3 years ago
Motomanmatt
Ohio
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

I have a sumsung ML1210 printer and am running Vists 32bit. What driver do I need for the printer?

asked 2 years, 11 months ago
Taberb
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

How do I get rid of ghost printing with a Samsung ML 1210 Printer

asked 2 years, 10 months ago
spinner22
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

why won't lables print on my Samsung ML-1210

Regular docs print but it won't print labels
asked 2 years, 9 months ago
Anonymous
georgetown, texas
on ML-1210
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Page 1 of 1
Copyright © 1995-2014 SAMSUNG All rights reserved.