Search Samsung

Looking for Answers about samsung LN32A450C1D?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:1)
Dishwashers(Q:14 A:23)
Dryers(Q:40 A:49)
Electric Ranges(Q:82 A:109)
French Door(Q:3 A:4)
Gas Ranges(Q:95 A:121)
Induction(Q:6 A:7)
LCD(Q:3 A:3)
LED Lighting(Q:2 A:3)
Microwaves(Q:112 A:165)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:37 A:66)
UHD TV(Q:39 A:34)
Verizon Wireless(Q:109 A:125)
Washers(Q:19 A:31)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category

Customer Questions & Answers for
LN32A450C1D

Customer Questions & Answers:
129 Questions
 | 
46 Answers

Questions & Answers for samsung LN32A450C1D

Question

How to stop the volume from periodically decreasing to 0 all by itself?

my tv just started independently adjusting the volume down to zero. i have to adjust the volume back up repeatedly (using either the remote or the tv buttons makes no difference) to stabilize the condition and then restore volume. this is really annoying. has anyone had this kind of problem?
asked 1 year, 9 months ago
volumeissues
dc
on LN32A450C1D
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
You might also wish to try a factory reset of your TV.

http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=168229&modelname=LN32A450C1D

The Samsung Online Support Team
answered 1 year, 9 months ago
SamsungTech73
0points
0out of 0found this answer helpful.
answer 2
Thank you for contacting Samsung.

We recommend you review the following support article.

http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=50758&modelname=LN32A450C1D

If what is suggested above does not resolve your issue, we recommend you file a service request.

http://www.samsung.com/us/support/service/request

Thank you for being a Samsung customer!

The Samsung Online Support Team
answered 1 year, 9 months ago
SamsungTech73
0points
0out of 0found this answer helpful.
Question

What do I use to wall mount my 32" flat screen LCD TV (LN32A450C1D)?

asked 4 years, 9 months ago
Melthor
Edmonton, AB.
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
As a matter of fact, the LN32A450 can be wall mounted. You will want to use a Vesa approved wall mount with a bracket size of 200mm x 200mm.

-MrSamsung
answered 4 years, 9 months ago
MrSamsung
Samsung HQ
0points
0out of 0found this answer helpful.
Question

QAM tuning / Digital Cable

I own a LN32A450 and by virtue of its QAM tuner, was able to recieve alll my subscibed analog and digital cable channels without the use of a cable box (comcast). Now the DTV can only pick up a fraction of the channels. I reprogrammed the channel settings (STD, HRC, IRC) and still no luck.

Will I have to get an extra cable box (at extra cost) or will there be a frimware / hotfix available to correct this situation?
asked 4 years, 3 months ago
Anonymous
Baltimore, MD
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Most likely this is an issue with your service provider and not the TV itself. I see that you have already tried to reprogram the TV's channels, and had no luck retrieving your old channels. If you head into the TV's menu, then go to the "Channel" sub-menu, you will see an option called "Channel List". Enter that option and you will see the "all" option at the top. Click into that and you will see the full view of every channel, active and inactive, that your TV has found. From there you can manually add the channel by highlighting the channel you desire to add, click enter, and select "add" from the drop down menu. If you have tried this and you still have no luck adding your channels, please either contact your Service provider for additional information on channel availability or 800-SAMSUNG for additional TV tuning.

-MrSamsung
answered 4 years, 2 months ago
MrSamsung
Samsung HQ
0points
0out of 0found this answer helpful.
Question

Extreme brightness

Lately when we turn on the TV the screen is extremely bright white. Meaning that we can see our shows but i guess the best way to describe it is, image placing thin layer of white tissue paper over the screen. That is what it looks like. everything is washed out white and clarity is at best fuzzy. This is our first LCD screen via tv moniter so little worried. About year and half old and should not be giving us fits. The fastest way currently to fix is shut off and unplug television and wait few seconds and plug back in. Never had this issue before until recently.
asked 3 years, 11 months ago
Dhornbrook
Chicago, IL
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I’m sorry you are having an issue with your device. Although with the information you have provided I do not have a solution for you; I will say that if you make a service request at http://www.samsung.com/us/support/o..., or contact 800-SAMSUNG, the service department should be able to provide you with a live solution.

-MrSamsung
answered 3 years, 11 months ago
MrSamsung
Samsung HQ
0points
0out of 0found this answer helpful.
Question

Can I add a Roku ethernet device to my TV?

asked 3 years, 9 months ago
Oldmil
Home
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Yes.
answered 2 years, 8 months ago
bcoutts
Florida, USA
0points
0out of 0found this answer helpful.
Question

after power is restored to TV after a breaker is turned back on, why is the red power indicater light blinking and the power will not come on

I turned off the breaker to the outlet that the TV was pluged into and when I turned the breaker back on the TV will not come back on. The red lght comtinues to blink. I even tried plugging the TV into another outlet. Still no power
asked 3 years, 4 months ago
mike05
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
power surge is very hard on TV'S you have blown the internal power supply.
answered 3 years, 1 month ago
kevin56560
0points
0out of 0found this answer helpful.
Question

I have a LN32A450C1D model LCD T.V. that will not power on after I moved it to a new location???

asked 3 years, 3 months ago
MattHergenrader
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Make sure both the top plug in and bottom plug in work on the wall.
answered 3 years, 1 month ago
kevin56560
0points
0out of 0found this answer helpful.
Question

How can I fix an intermittent picture issue?

The picture goes to a white screen, appearing ghostly with perfect audio. If the TV is slightly moved the picture will go to this white screen and if slightly moved will come back to normal, but can go back to a white screen if the TV settles. All connections have been confirmed. Appears to have a loose connection within the TV itself.
Image(s)
User submitted image
User submitted image
asked 3 years, 3 months ago
BeckyL
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
You have a connection issue, with the cables not the TV.
answered 3 years, 1 month ago
kevin56560
0points
0out of 0found this answer helpful.
Question

All I have hookedup to my t.v. is a dvd player...what channel or setting do I have to put tv on to get dvd player to work ?

asked 3 years, 2 months ago
carmovers
Omaha NE
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
to what ever hdmi port it is hooked to.
answered 3 years, 1 month ago
kevin56560
0points
0out of 0found this answer helpful.
Question

no sound out of component cables

im getting no sound when using the component wires on my comcast hd box and samsung tv. video is fine but no sound. settings all seem to be ok.
asked 3 years, 2 months ago
Anonymous
boston
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
component cables require the digital optic sound cable
answered 3 years, 1 month ago
kevin56560
0points
0out of 0found this answer helpful.
Question

How can I connect my TV to my laptop?

I want to use my TV as my computer monitor.
asked 2 years, 10 months ago
HeatherJan
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
You need to connect the TV to the laptop's video output jack (VGA, HDMI, depending on your laptop's hardware). Then you need to tell the laptop to output to a projector by changing the display settings or by simply restarting the computer. If you are getting a "mode not supported" message on-screen you need to make sure the laptop is outputting a 1360x768 resolution.
answered 2 years, 8 months ago
bcoutts
Florida, USA
0points
0out of 0found this answer helpful.
Question

I did have a full screen on 16:9 but now I can't get to the "wide fit" on my picture menu. It is visible but not accessible.

I did add a new DVD/VCR recorder to the set and that created the screen shrinking. I disconnected completely the DVD/VCR recorder but I still can't get my to "wide fit" on my picture menu. What is happening?
asked 2 years, 9 months ago
stillmad
Moline IL
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
It all depends on your video source and what input you have the TV on. However, 16:9 gives the truest proportions in most cases.
answered 2 years, 8 months ago
bcoutts
Florida, USA
0points
0out of 0found this answer helpful.
Question

My tv turns off by itself How do I correct? model # isLN32A450C1D Thanks

asked 2 years, 9 months ago
mcrider2010
Home
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Make sure the sleep timer is off (it's under Menu>Setup>Time). If that is not the problem, you probably need to have the TV replaced or repaired.
answered 2 years, 8 months ago
bcoutts
Florida, USA
0points
0out of 0found this answer helpful.
Question

likely cause of weak signal error

the existing tv works fine on the line in question,
this tv worked fine with the same ISP/Cable Cablevision at our prior location.....
we get a weak signal error with all coax cables..suggestions?
asked 2 years, 9 months ago
pinkears
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Perhaps your coax cables are not the recommended type or your cables/wall jacks in the house are no good. I would have someone from Cablevision come take a look. He can measure the signal quality and troubleshoot any errors.
answered 2 years, 8 months ago
bcoutts
Florida, USA
0points
0out of 0found this answer helpful.
Question

My tv picture is black in the middle with picture on each side.

asked 2 years, 9 months ago
Ducki
on LN32A450C1D
-1point
0out of 1found this question helpful.
1 answer
Answers
answer 1
Try turning off close captioning.
answered 2 years, 8 months ago
bcoutts
Florida, USA
-1point
0out of 1found this answer helpful.
Question

Is there a "box" I can buy that will allow me to connect to my wireless network to receive movies etc?

I have a LN32A450C1D and DSL internet
asked 2 years, 8 months ago
biebs1
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
in the back is a jack conector to your notebook HDMI or VGA or DVI.
answered 2 years, 3 months ago
Manuchox
Rosario, Santa Fe
0points
0out of 0found this answer helpful.
Question

model #LN32A450C1D

TV turns off and back on within a few minutes of turning it on. Is a firmware update needed. Purchase in 2008 or 2009.
asked 2 years, 7 months ago
quail4you
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
i was the same problem. i change the power cable... problem solve
answered 2 years, 3 months ago
Manuchox
Rosario, Santa Fe
0points
0out of 0found this answer helpful.
Question

How can I fix a black and white double image from my sony dvd/vcr to my samsung

I recently added hd and when I switched the cables, the dvd doesn't work
asked 2 years, 7 months ago
Anonymous
california
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
if this because you must turn your region's norm (pal-n - ntsc)
answered 2 years, 3 months ago
Manuchox
Rosario, Santa Fe
0points
0out of 0found this answer helpful.
Question

Why does it take so long for my tv to turn on?

I have to repeatedly press the "on" button on the remote before the tv turns on. The light blinks and that's it. The same happens when I use the "on" button on the side of the tv. I've asked about this before but never got a response. At first it was just a now and then thing...even when the tv was brand new but now it occurs almost evey friggin' time. Please let me know what the problem is.
Thanks
asked 2 years, 4 months ago
scorp1054
Somerville, NJ, USA
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
I’m sorry you are having an issue with your device. With the information you have provided, it would be best if you navigate to the Samsung Support Page and either click on the link to speak with a Live Rep directly under the “Contact Support” section in the middle of the page or request service for your device under the “Schedule a Repair” section. Before contacting support, you could also try performing a firmware update and see if that solves your issue. Please have your device’s exact model number and serial number ready for faster assistance.

Support Page:
http://www.samsung.com/us/support/

Live Chat:
https://sales.liveperson.net/hc/491...

Request Service:
http://www.samsung.com/us/support/s...

App Support:
http://www.samsung.com/us/appstore/...#

Samsung Service Number:
800-SAMSUNG

-MrSamsung
answered 2 years, 4 months ago
MrSamsung
Samsung HQ
0points
0out of 0found this answer helpful.
Question

Samsung 32" TV (LN32A450) will not power on. Red standby light blinks once, then solid, then it won't turn on?

Sometimes it will power on fine, but most of the time, it will take between 3-10 (sometimes more) attempts at pressing the power button before it powers on.
asked 2 years, 1 month ago
WD333
on LN32A450C1D
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Thank you for contacting Samsung. Here's an article that may answer your question: http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=351341&modelname=LN32A450C1D

If this didn’t answer your question, please contact us at 1-800-SAMSUNG, or if you want to come through a social media channel, we have a couple options for you:

If you have a Twitter account, go here or to this URL:
http://twitter.com/#!/samsungsupport
Having a transaction number or model number and serial number handy ahead of time will be helpful.

If you have Facebook, go here to this URL:
http://www.facebook.com/SamsungSupport
Click on the "Support Form" button.

Thank you for being a Samsung customer!

The Samsung Online Support Team
answered 2 years, 1 month ago
SamsungTech42
0points
0out of 0found this answer helpful.
1 2 3 4 5 ... 7 next>>
Copyright © 1995-2014 SAMSUNG All rights reserved.