Looking for Answers about samsung (Unknown)?

Yes. All components should be connected via HDMI to the receiver and then from the receiver to the TV.

I trolled the web and found a code for my specific box. Just typed in program "your cable companies name" remote with hw-d600 and after filtering a few links found one that worked...for Comcast remote with red "ok/select button" I used 10060. May not work for all remotes...Hope this helps.

yes it shows sat hdmi 2 . then it will switch to tv arc and shut off

The D650S has speakers in the box with the receiver. So it is an all in one home theater in a box system.

I’m sorry to hear that you're having this problem with your Blu-ray player.

Unfortunately, this seems to be a service related issue.

Since it's very difficult to diagnose and troubleshoot based on the information posted, I recommend that you contact Samsung's customer service center and try speaking to one of our chat agents at the following link:

http://www.samsung.com/us/support/

Or you can also call them directly at 1-800-SAMSUNG.

We appreciate your support of Samsung products, and we look forward to assisting you.

--HDTech

Thank you for contacting Samsung.

While we appreciate your curiosity and interest in Samsung products, we cannot speculate on the release of updates to our products. We recommend you connect with us via our social media channels for future product & software announcements.

https://www.facebook.com/SamsungUSA

https://twitter.com/Samsungtweets

Thank you for being a Samsung customer!

The Samsung Online Support Team

You can not when in Ipod audio mode. Change it to Ipod video mode then you will be able to select the playlists or song of your choice.

Settings>System>Reset

I’m sorry to hear that you're having this problem with your Blu-ray player.

With the limited information that has been provided, I'm unable to assist with troubleshooting. I would recommend contacting the Samsung customer service center, and speaking to one of our chat agents at the following link:

http://www.samsung.com/us/support/

Or you can also call them directly at 1-800-SAMSUNG.

We appreciate your support of Samsung products, and we look forward to assisting you.

--HDTech

I had a similar problem, the hdmi cable was not fully plugged in. It also happens with the digital audio. Make sure the cables are securely connected at each end.

If you're using Anynet+ and the television and receiver are connected with HDMI, try turning on the receiver first. The television will then be notified to power up and switch to the appropriate input.

The amplifier may go to a default setting if not using Anynet+, but if that doesn't help, reach out to the Samsung customer service center at 800-SAMSUNG.

--HDTech

Thank you for contacting Samsung. This is a proprietary port. if you've lost the cradle that would hold the iPod, you can find all the parts and accessories to your product here: http://www.samsungparts.com/Products/Parts_and_Accessories/HWD600/Default.aspx

Thank you for being a Samsung customer!

The Samsung Online Support Team

You need to plug in the Sat box to the hw-d600's SAT HDMI port, then the d600 to the tv. Then you need to turn on the d600 and select sat on the remote.

If the unit you have is physically damaged, you can order a replacement part by going to the www.samsungparts.com website.

Otherwise, you may want to call the Samsung customer service center at 800-SAMSUNG to see if they can assist with a repair or troubleshooting.

Thanks for your interest in Samsung products!

--HDTech

Replacement parts and accessories can be purchased directly from the www.samsungparts.com website.

Thanks for your interest in Samsung products.

--HDTech