Looking for Answers about samsung 2.1 Channel Sound Bar Home Theater System?

Input PCM, Dolby, DTS is determined and indicated by your source audio from TV or whatever it is hooked to. It is not selectable on the soundbar. You must change the output of the source device and the soundbar will indicate what it is receiving. Most TV allow PCM or Dolby select and some will output DTS. You will have to look around in your sound setup menue.

I use fiber optical connection between television and soundbar

Yes - those are protective covers that have to be removed prior to install. The plug should not fit with the covers on.

This product does have both a digital (fiber) input, as well as a 1/8" mini-jack input. So if you take your speaker outputs from another device and use an adapter to change them to 1/8" "headphone" jack, you should be able to plug it into this speaker bar. I've plugged in portable music players to mine before, such as an Ipod, or a smartphone.

i had the same problem, i actually returned it and got a new one and i dont have that problem anymore.

You did not say which remote you are using. If you have the universe remote that comes with cable/DSL units then you have to program the remote for the AV1 position. But this also means that to turn the soundbar on you have to switch to the AV1 position, point the remote at the cable/DSL box and press the "pwr" button not the on button under power.

Is there a setting on the tv for using external speakers? If so this may be the solution, have you tried connecting the sound bar to another devise? If you get sound with other devises it may be something wrong with your tv, or just a setting you need to change, however if the other devises dont work it could be defective.

You can Press the Power link button on your sound bar remote and that should link both units to your tv remote, this allows the sound bar to automatically turn off or on with the tv and also the volume controlls on your tv will work on the soundbar. Check the user manual for more details on Power Link.

It may be a defect, i had a similar problem with the actual sound bar humming, i had returned it and got a new one. the new one doesnt have a hum, neither of the two subwoofers from either unit i had hummed, so i think it most deffenetly is a deffect or prehaps something got loose inside. hope this helps.

That was quite a fall. The power cord is hardwired to the soundbar. It needs to go th a repair shop or Samgsung.

You can unplug the subwoofer and it will "unlink" then when you want to use it again just link it back up.

There should be an auto power button on your remote, all you have to do it turn it off.

Samsung HT-WS1 soundbar remote code(s) for Cox communications remote

On the product page for the item, you should see the link for the downloadable manual.

Also, here's a link: http://www.samsung.com/us/support/owners/product/HT-WS1G#content2

Program your comcast remote to control your TV and set your TV settings to external speakers. That should work.

Without knowing why your subwoofer is making that noise, it's difficult to determine the best course of action. I might recommend contacting the Samsung customer service center at 800-SAMSUNG for further assistance and troubleshooting.

--HDTech

I have lost the Remote Control for my HT-WS1 Sound Bar. How can I order a replacement?

The wall mount would look like this:

http://www.samsungparts.com/Product...

You can also order the part directly from the www.Samsungparts.com website by clicking the above link.

Thanks for your support of Samsung products.

--HDTech

I have not been able to get that to work. im going to have to say no.

It may be possible, but I don't have any way to advise, sorry. The HT-WS1G officially supports one subwoofer.

--HDTech