Looking for Answers about samsung HT-D550?

I agree with the other answer. But soldier your splices and use heat shrink tubing for a better connection.

You are right, I bought the same product. I sent a email to samsung, they are suppose to fix it.

If you can't see prologic II on the front panel while pressing the PLII on the remote, look for matrix instead. After you set the home theater to matrix you'll be able to hear the sounds on all the speakers already.

More than likely the movie is not outputing in 5.1. If you look at the Troubleshooting guide for the unit @ http://support-us.samsung.com/cyber/popup/pop_troubleshooting.jsp?ia_cd=N0000074&model_name=HT-D550 and navigate to Audio -> No Sound From The Rear Speakers to troubleshoot why you are not getting any sound.

No this product does not come with an ipod dock. You have to use the usb cable to connect.

Yes, if you have a cable box, you need buy an optical cable to run from the back of your cable box to your dvd player. Or in the case of no cable box, run it from back of dvd to television, if your tv supports an optical cable. I had the same problem and that's how I solved it. I recommend buying it from Amazon, as your local Radio Shack or Best Buy over charge, in my opinion.

I had the same problem. I had to run an optical cable from back of dvd surround sound to the back of cable box. Hope this helps!

nope, audio goes from dvd player to the sound system. There is no audio from the tv to the dvd player even through the hdmi. Too bad since this system sounds pretty good.

the HTD-550 is a DVD player NOT a Blu-Ray player. See manual p7

HT d550 is NOT a Blu-Ray player.

Try using the Matrix, or other sound modes, when using stereo signals.

FM is left and right channel, so the left and right channel (plus bass) are used for those inputs. If you want to use the other speakers, the Home Theater system will have to process that signal using the different sound modes.

--HDTech

Purchase a HDMI cable. then plug in to reciever and tv.

Fro all speakers to play there must be 5.1 info, which you don't have in a two channel FM signal. You might try the Dobly Pro Logic II mode, see page 38 of manual.

HDMI cables are recommended for a digital connection.

Unfortunately, with the limited information that has been provided, I'm unable to assist with troubleshooting. I would recommend contacting the Samsung customer service center, and speaking to one of our chat agents at the following link:

http://www.samsung.com/us/support/

Or you can also call them directly at 1-800-SAMSUNG.

We appreciate your support of Samsung products, and we look forward to assisting you.

--HDTech

Yes. Take the audio portion from the WII cable and plug it into the HT-D550 then take the video portion of the cable and plug it into your tv

I’m sorry to hear that you're having this problem with your Blu-ray player.

I’d recommend trying to reset the unit by turning the unit on and making sure that the disc tray is empty. Then, press and hold the STOP button until the unit resets. Then, go through the initial setup and power down the unit. Then, try and restart the unit and you should have proper operation.

If you still continue to experience difficulty, I would recommend contacting the Samsung customer service center, and speaking to one of our chat agents at the following link:

http://www.samsung.com/us/support/

Or you can also call them directly at 1-800-SAMSUNG.

We appreciate your support of Samsung products, and we look forward to assisting you.

--HDTech

I’m sorry to hear that you're having this problem with your Blu-ray player.

I’d recommend trying to reset the unit by turning the unit on and making sure that the disc tray is empty. Then, press and hold the STOP button until the unit resets. Then, go through the initial setup and power down the unit. Then, try and restart the unit and you should have proper operation.

If you still continue to experience difficulty, I would recommend contacting the Samsung customer service center, and speaking to one of our chat agents at the following link:

http://www.samsung.com/us/support/

Or you can also call them directly at 1-800-SAMSUNG.

We appreciate your support of Samsung products, and we look forward to assisting you.

--HDTech

p14 of the manual has detail instructions and codes for most tvs

With the exception of 1080i all the other resolutions are progressive scan. See page 26 of the manual.