Search Samsung

Looking for Answers about samsung DVD-VR320?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:3)
Dishwashers(Q:17 A:26)
Dryers(Q:45 A:56)
Electric Ranges(Q:87 A:114)
French Door(Q:4 A:5)
Gas Ranges(Q:102 A:131)
Induction(Q:6 A:9)
LED Lighting(Q:2 A:3)
OTR(Q:120 A:174)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:42 A:79)
UHD TV(Q:68 A:60)
Verizon Wireless(Q:109 A:125)
Washers(Q:25 A:38)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category

Customer Questions & Answers for
DVD-VR320

Customer Questions & Answers:
16 Questions
 | 
5 Answers

Questions & Answers for samsung DVD-VR320

Question

How do I get this unit out of safe mode?

This DVD/VCR combo is not responding to anything. The display shows "SAFE" and won't do anything. The only thing I noticed working is the video pass-thru on input 1 and 2. Is there anything I can do to reset this unit?
asked 4 years ago
morts99cobra
Hastings, MN.
on DVD-VR320
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Press and hold the "INFO" button for 5 seconds. It is explained on bottom of page 13 in the manual.
answered 3 years, 10 months ago
wag1512
Illinois
0points
0out of 0found this answer helpful.
Question

Up graded software on DVD-VR320

I tried to update the software for this unit with (Firmware) (ver.1.0) it didnot complete and now the DVD side does not read any DVD's.
Can you provide a correction or suggestion to reset this unit to the factory default setting or how to upgrate the firmware.
Thank You.
asked 3 years, 11 months ago
kenallen32
Mi
on DVD-VR320
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
On the unit's front panel (not the remote), press the > (play) and the >>| (fast forward) buttons at the same time then power off. See page 83 in the manual.
answered 3 years, 10 months ago
wag1512
Illinois
0points
0out of 0found this answer helpful.
Question

DVD will not play continuousy.

All features seem to work o.k. I can record vhs to dvd, tv to dvd. The problem is when a dvd is played, it stops at every other chapter. You must manually advance to the next chapter to continue playback. There is a setting in the menu that asks to create or not create chapters. I have tried both settings but to no avail. Is there a correction for this?
Thanks
PS:I asked this question awhile back and the response said to check out a certain Samsung web site. The answer there was not even close to my question.
asked 1 year, 7 months ago
Recall
New Cumberland, PA, USA
on DVD-VR320
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Thank you for contacting Samsung. The difference appears to be that you're creating a title list whereas you want to create a play list. Title lists treat each video as a separate title and stops in between them. However, the playlist will play through each scene. Please consult page 69 of your manual for details.

If you have any further questions, please contact us at qasupport@sea.samsung.com and let us know how we can assist you further. Thank you for being a Samsung customer!

The Samsung Online Support Team
answered 1 year, 7 months ago
SamsungTech42
0points
0out of 0found this answer helpful.
Question

Why does playback of a dvd stop at the end of certain chapters?

All features seem to work o.k. I can record vhs to dvd, tv to dvd. The problem is when a dvd is played, it stops at every other chapter. You must manually advance to the next chapter to continue playback. There is a setting in the menu that asks to create or not create chapters. I have tried both settings but to no avail. Is there a correction for this?
Thanks
asked 1 year, 8 months ago
Recall
New Cumberland, PA, USA
on DVD-VR320
-1point
0out of 1found this question helpful.
1 answer
Answers
answer 1
Thank you for contacting Samsung.

We recommend you review the following support article:

http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=1348&modelname=DVD-VR320

Thank you for being a Samsung customer!

The Samsung Online Support Team
answered 1 year, 8 months ago
SamsungTech73
-1point
0out of 1found this answer helpful.
Question

playback stops after every other chapter.

'Chapter Creator' is set to 'off' when recording. You must manually advance to next chapter on dvd remote every time playback stops, which is every other chapter. There is no 'playlist' function as shown on pg. 69 of manual to do editing. I have been told this is a way of correcting the problem.
asked 1 year ago
Recall
New Cumberland, PA, USA
on DVD-VR320
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Thank you for contacting Samsung.

We'd like to assist you, but we're going to need additional information so that we can better address your product concerns. We recommend you email us at qasupport@sea.samsung.com. Please provide a more in-depth description of your product issue, as well as the full product model code, serial number and your contact info. Specifically, we'll need to know what type of discs (DVD-RW, -R, +RW) you are using to record the content and whether you used video mode or VR mode.

Thank you for being a Samsung customer!

The Samsung Online Support Team
answered 1 year ago
SamsungTech73
0points
0out of 0found this answer helpful.
Question

Receiving this message when loading a blank disc: "The disc can be neither played nor recorded. Please check the disc."

I have had very few problems with this unit. I primarily buy TDK DVD-R 16x in spindles of 50 or 100 and average one unusable disc per spindle. Last month I purchased a spindle and used about 15 discs with no problems. Then all of a sudden every disc I load receives the above mentioned error message. I opened a new spindle and also receive this error on every disc. Both of these spindles were purchased at the same time so I went out and purchased a spindle of Maxell DVD-R 16x discs from a different retailer and also receive the error. Interestingly, I have many older discs which are partially full of recorded content and I can load them and add content with no problems! Does anyone have any idea what is happening?
asked 3 years, 10 months ago
wag1512
Illinois
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

how can i get diagram for dvd rack of DVD-VR320

asked 3 years, 6 months ago
Anonymous
34472
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

How do I download the latest updates to my recorder? Do I have to burn information onto a blank DVD-R disc, and then place it in my recorder?

I keep getting a message that my recorder can't record or play any of my blank (TDK, and Sony) DVD-R disc. I also get messages that there was a system error, and that I should turn off the recorder and turn it on again.
asked 3 years, 5 months ago
SIC64
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Where can I get a replacement remote control for my Samsung DVD DR 320?

asked 3 years, 2 months ago
mcsullivan0
on DVD-VR320
-1point
0out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

how to record from VHS to DVD

When I insert a DVD and a VHS, I press record and all I get is menu and can't get to the menu or change it.

I insert a DVD and a VHS tape and press record. All I get is "Menu" and cannot change that...it just stays there. I have many to rcord and was told that I can do so on the 320?

DVD-VR320
asked 3 years, 5 months ago
Kithelen
Palm Harbor, FL
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

My controller for a DVD-VR320 has stopped working. Can I get a replacement?

asked 2 years, 9 months ago
Anonymous
Ky, USA
on DVD-VR320
-1point
0out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

I tried to use a DVD+R disc in the unit. I now can't record to a DVD-R. Didn't know there was a differece. Is there a remedy?

asked 3 years, 3 months ago
carson49
Prague, Oklahoma
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

blank dvd's will not load

I tried several different brands of DVD-R and none of them will load. I even tried to load a DVD I previosuly burned with this unit and none will load and play. A store bought movie will play on the unit.

What could be wrong?

thanks
asked 2 years, 7 months ago
Billzak
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

Where can I get a new remote for my Samsung DVD-VR320

asked 2 years, 11 months ago
sheryli
TN
on DVD-VR320
-1point
0out of 1found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

I am receiving error messages when attempting to record a VHS to DVD

"No Signal" followed by "This Function Is Not Available" followed by "This Disc Cannot Be Recorded. Please Check The Disc"
asked 2 years, 9 months ago
mbail40
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

I need a replacement controller

asked 2 years, 9 months ago
Anonymous
Ky, USA
on DVD-VR320
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Page 1 of 1
Copyright © 1995-2014 SAMSUNG All rights reserved.