Search Samsung

Looking for Answers about samsung BD-D5700?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:2)
Dishwashers(Q:16 A:25)
Dryers(Q:44 A:55)
Electric Ranges(Q:85 A:112)
French Door(Q:3 A:4)
Gas Ranges(Q:98 A:126)
Induction(Q:6 A:9)
LED Lighting(Q:2 A:3)
OTR(Q:117 A:171)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:41 A:74)
UHD TV(Q:64 A:56)
Verizon Wireless(Q:109 A:125)
Washers(Q:25 A:37)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category
See all Samsung Questions and Answers Bluray Players Q & A

Customer Questions & Answers for
BD-D5700

Customer Questions & Answers:
1,490 Questions
 | 
644 Answers

Questions & Answers for samsung BD-D5700

Question

TV control code for Hannspree

Is there a tv control code to add Hannspree to the Blu-Ray BD-D5700 remote?
asked 3 years, 4 months ago
klg0919
on BD-D5700
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

what does network interferance occured please try later mean ?

I have been connected before
asked 3 years, 7 months ago
mick555555555
mpls
on BD-D5700
0points
0out of 0found this question helpful.
16 answers
Answers
answer 1
It could be as simple as my problem. My wireless router is right outside my bedroom in my living room. Because of the thick walls (likely lead paint), if I close my door it can't access the internet, but if I open the door it works really well.
answered 2 years, 8 months ago
ccm275
Kansas City
-1point
0out of 1found this answer helpful.
answer 2
I received that message also. I ended updating by router from my provider. It gave me a stronger signal, my router was old.
answered 2 years, 8 months ago
Joyjazz
Southern MN
0points
0out of 0found this answer helpful.
answer 3
Sometimes people live in homes prier too 1960 and all there walls are painted with lead baced paint.
Try moving your net work transmiter closer to your player to get a beter single. this might help.
answered 2 years, 9 months ago
scotton51
Sioux city Iowa
-1point
0out of 1found this answer helpful.
answer 4
I got the network interference error a few times when I try to start up Netflix, and it goes away whenever I fully power down my IPOD touch by holding the button at the top of the device for a few seconds. It seems there is some sort of interference between the blu-ray wireless and the IPOD wireless. I don't know if I need to change some setting on my wireless router? Any thoughts?
answered 2 years, 9 months ago
olivea
+1point
1out of 1found this answer helpful.
answer 5
First try resetting your router and modem, or gateway. If that doesn't fix your problem try checking your network settings with your computer and make sure you allow sharing on your network. That should cover the obvious fixes to this issue.
answered 2 years, 9 months ago
FixedIncomeFanFun
Kentucky
-1point
0out of 1found this answer helpful.
answer 6
There is interference between your wi- fi router and the dvd player wi- fi, which is called the Network,it could be cell phone, laptop etc.Try to re-connect in a few minutes
answered 2 years, 9 months ago
rudster6969
Tiverton, R.I.
+1point
1out of 1found this answer helpful.
answer 7
Network busy bad connection
answered 2 years, 9 months ago
ibdawg
ms
-1point
0out of 1found this answer helpful.
answer 8
try resting router
answered 2 years, 10 months ago
salgado70
0points
1out of 2found this answer helpful.
answer 9
My wireless router locks up every week. My router simply requires a reboot. Try this.
1. Turn off Samsung Blu-ray player.
2. Turn off wireless router for at least 10 seconds. Anything less and it won't fix your problem.
3. Turn on wireless router. Let it boot up for 3-4 minutes at least. Anything less and it won't fix your problem.
4. Turn on Samsun Blu-ray player.
5. On Samsung Blu-ray player, go to Smart Hub, then choose an internet service, like Netflix.

That should help in most cases.
answered 2 years, 10 months ago
bulrush
MI
+1point
2out of 3found this answer helpful.
answer 10
It means that Samsungs Network is currently down due to service or problems. Try it again tomorrow and hopefully it will be working again.
answered 2 years, 10 months ago
ElectronicsJunkieVA
+1point
1out of 1found this answer helpful.
answer 11
I kept getting the network interference message. Turned out my phone connection for FIOS was ancient, full of rusted connections. When I picked up the landline phone there was lots of static. Had the phone company replace the junction box on the outside of my house, and the network interference messages went away.
answered 3 years ago
BlairJ
Seattle
0points
0out of 0found this answer helpful.
answer 12
had the same problem. Have a samsung smart tv and it is working fine. I am using a wireless router and had to go into the settings on the router to change to a WEP setting and run the shared option from the set up disk that came with my router. I am not computer person I am a plumber with not much patience for computers and worked through it. every thing works fine.
answered 3 years, 1 month ago
DEF66
0points
0out of 0found this answer helpful.
answer 13
I called Samsung. I was told to update the firmware. did that and it now seems to be working.

settings - by internet, then get latest version
answered 3 years, 1 month ago
JGerber
+1point
1out of 1found this answer helpful.
answer 14
I had to go into settings go to connection and say yes to reset and it always worked after that, sometimes I have to enter my password for netfex. Mine is wireless.
answered 3 years, 3 months ago
twinoftwins
washington
0points
0out of 0found this answer helpful.
answer 15
I am having the same issue I have it hard wired into the lan. I installed it last week and it was working yesterday I started getting the network interferance. I went back through the settings and hard wired is still checked and it is giving me an IP address. I have done a reset and gone back through the settings and am still getting the "network interferance". I can get to the applications but as soon as I make a choice I get the network interferancce.
answered 3 years, 6 months ago
schewe0520
north east, md
0points
0out of 0found this answer helpful.
answer 16
I received this once. What had happened in my case is that the connection had been changed from wireless to wired, therefore it couldn't connect to the internet. Not sure if that would be the case every time this message appears though.
answered 3 years, 6 months ago
cgass177
Lynnwood, WA
-2points
0out of 2found this answer helpful.
Question

what can I do to prevent netflix from freezing?

Every time I try to link to netflix and choose a video everything freezes. Help!
asked 3 years, 6 months ago
rkharmon
on BD-D5700
0points
0out of 0found this question helpful.
8 answers
Answers
answer 1
you can check the speed in witch data transfers over or how many devices you have connected to your wi-fi connection and also the number of devices connected to your Netflix account.
answered 2 years, 7 months ago
JaYkKo
Lancaster,PA
-1point
0out of 1found this answer helpful.
answer 2
I have the new 55 LED 6000 series & running it wireless thru my Blueray player. Streaming movies was a nightmare it kept rebuffering and some times shutting off ? All i did was upgrade my Firmware its a free download from Samsung. the firmware upgrade is 1025. after doing this it made all the difference in the world. Good luck !!!!
answered 2 years, 9 months ago
scags100
Brewster Mass
-1point
1out of 3found this answer helpful.
answer 3
Direct wire with ethernet cable, do not use wireless because it is much slower
answered 2 years, 9 months ago
ibdawg
ms
-2points
0out of 2found this answer helpful.
answer 4
Upgrade your router to N technology if its not already one. Again the closer the router to your device, the better it performs. If you have a VOIP working at the same time you are streaming netflix, it impedes the bandwidth. Any other load on your bandwidth example streaming on your PC or heavy online gaming at the same time affects the performance of your smart TV.
answered 2 years, 10 months ago
Sonny19
-3points
0out of 3found this answer helpful.
answer 5
from all the devices i have been through and currently use i know now that it is netflix and netflix only that is why it runs the way it does.talk to them.
answered 2 years, 11 months ago
cda03107676
kennesaw,georgia
-2points
2out of 6found this answer helpful.
answer 6
I had to go to my account on netflix and lower the streaming video quality to stop it from freezing. Most of netflix is all HD video and it requires a high quality router to handle the transfer rates. The other factor could be the router your using. If you are using an older one you may want to consider upgrading to one that is made to handle HD video streaming.
answered 2 years, 11 months ago
GuyStuff
Liverpool, NY
0points
2out of 4found this answer helpful.
answer 7
Try disabling your firewall on your router.
answered 3 years ago
beenthere
georgia
-4points
0out of 4found this answer helpful.
answer 8
move your router closer or better yet connecit derectly to the blu ray plyr.
answered 3 years, 6 months ago
ijustwantaanswer
ijustwantaawnswer
-4points
1out of 6found this answer helpful.
Question

why does the netflix app say i am not connected to the internet when i am

i can check my network status, it says im connected, when i click on netflix, it says im not connected, why?
asked 3 years, 2 months ago
acadian
tucson
on BD-D5700
0points
0out of 0found this question helpful.
7 answers
Answers
answer 1
Just spoke with netflix and they know about this problem and fully admit that this model and the 6700 cannot stream netflix at this time. Awesome. they said they are working on it.
answered 2 years, 8 months ago
austincpa
-2points
0out of 2found this answer helpful.
answer 2
We had this same problem today. Very frustrating. This type of functionality is so common now that you wouldn't think this problem would exist. Unfortunately, it does. C'mon Samsung. We tried upgrading the firmware, tried unplugging for long periods of time, tried resetting the unit. None of it worked. Here's what did work: We signed up for a Samsung account. Not sure how or why that had any impact but our Netflix fired right up afterwards. So, that was our solution - sign up for a Samsung account and login through the player. Give it a shot. Good luck!
answered 2 years, 9 months ago
Anonymous
-3points
0out of 3found this answer helpful.
answer 3
it's thier sevice ,but could be your internet also
answered 2 years, 11 months ago
cda03107676
kennesaw,georgia
-3points
0out of 3found this answer helpful.
answer 4
Mine came up with this message every time I tried to access the Netflix app. The firmware update that came out on Sept 16 seems to have fixed this problem. After I applied it, the Netflix app finally works. If you haven't already applied the firmware update, do so right away. Hopefully this will fix your problem like it fixed mine!
answered 3 years ago
mvanoss
-1point
1out of 3found this answer helpful.
answer 5
Samsung will tell you to call Netflix and claim it could not possibly have anything to do with their BluRay... The very pleasent, professional woman at Netflix suggested I tried unplugging it (I'd reset it twice per advice here, but had not unpluged it). Unplug it, count to 15 and plug it back in. Everything worked fine.
answered 3 years, 1 month ago
Kyle1776
Orlando
-1point
2out of 5found this answer helpful.
answer 6
I thinmk it is the app itself. I went to netflix and deactivated the player. I then had to do a factory reset and reload the smart hub. After updating I clicked on Netflix Icon and was given a new activation code. Once entered I was able to connect.
answered 3 years, 1 month ago
BigJair
-1point
1out of 3found this answer helpful.
answer 7
It may be that either Netflix's servers aren't able to be accessed at the moment, or you may need to reset or restart your Blu-ray player. If you continue to have trouble, you may want to reset the unit or contact the Samsung customer service center for further troubleshooting.

If the player is connected, you should be able to access your other apps. You may want also check other apps to see if they able to connect to the Internet as well. That may assist the Samsung agent helping you.

--HDTech
answered 3 years, 2 months ago
MisterSamsung
SamsungHQ
-4points
1out of 6found this answer helpful.
Question

how do I enter the @ sign from my remote for entering email address

none
asked 3 years, 7 months ago
rchernniak
Norcross Georgia
on BD-D5700
0points
0out of 0found this question helpful.
6 answers
Answers
answer 1
The @ symbol is available via the onscreen typing/keyboard interface. Select symbols or numbers or something of that type. Experiment a little? It’s on there...
answered 2 years, 9 months ago
ipete
rockford, il
0points
0out of 0found this answer helpful.
answer 2
If you have a smartphone, you can also try downloading the Samsung Remote app. It has been a huge help when entering text for the various apps. Plus since it works over wifi, it works in situations that a typical remote wouldn't.
answered 2 years, 10 months ago
sabodustin
Ohio
0points
0out of 0found this answer helpful.
answer 3
Go to the star where you enter the letters you will get a screen with a page of characters enter what you need when you finish go to the bottom of the screen and press a/A button and it will take you back the screen with the letters. I hope this helps you
answered 3 years, 1 month ago
BrendaF
USA
0points
0out of 0found this answer helpful.
answer 4
Press the "1" button on the remote until the "@" appears in the dialog box.
answered 3 years, 5 months ago
grnwoodcug
0points
0out of 0found this answer helpful.
answer 5
by pressing the subtitle button several times; look at the screen as you press the button so u can see 4 ur self.
answered 3 years, 6 months ago
ijustwantaanswer
ijustwantaawnswer
0points
0out of 0found this answer helpful.
answer 6
Use the 1 button on the remote. You will need to press the button several times to scroll through the symbols. My 8 year old taught me that :)
answered 3 years, 7 months ago
NelsInMN
Minnesota
0points
0out of 0found this answer helpful.
Question

how do I get netflix?

asked 2 years, 11 months ago
Anonymous
on BD-D5700
0points
0out of 0found this question helpful.
5 answers
Answers
answer 1
Smart Hub > Samsung Apps
You need to have an account to use netflix
If you are not yet a member, set up your membership
answered 1 year, 10 months ago
QueenMaub
InnerWebs
0points
0out of 0found this answer helpful.
answer 2
Log on to it through the recommended apps in your smart hub window. Then follow the prompts .
answered 2 years ago
Jeff3603
San Ramon, CA.
0points
0out of 0found this answer helpful.
answer 3
Log on to netflix and subscribe monthly or on your BR just click on netflix and subscribe
answered 2 years, 9 months ago
ibdawg
ms
0points
0out of 0found this answer helpful.
answer 4
Depending on the model of Blue Ray Player there is already a Netflix button on the remote. By pressing the button it will automatically install nexflix. After that you need a netflix account and need to activate netflix on your player.
answered 2 years, 10 months ago
barf
home
0points
0out of 0found this answer helpful.
answer 5
It will be available in the Recommended Apps section.

--HDTech
answered 2 years, 11 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

WHEN TURNING ON IT TAKES A LONG TIME TO GO THROUGH THE LOAD SEQUENCE BEFORE I CAN GO TO THE APPS

WHAT CAN I DO TO GO RIGHT OT THE APPS
asked 3 years, 2 months ago
MERCHANT2
on BD-D5700
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
I agree with sonny19. Get the fastest router you can buy, and whenever possible, connect it with an Ethernet cable for best connection. Having said that, I have mine wirelessly conncted to a Cisco Valet Plus router 1 floor away, and it works fine.
answered 2 years, 9 months ago
melodymaker
Las Vegas
-1point
0out of 1found this answer helpful.
answer 2
Your router should be of atleast 2.4 Ghz range and should include N technology for loading your contents faster. Also the closer the router to your device with as less interference as possible the better. If your internet service's bandwidth is heavily used during the same time you are using smart tv then it also contributes to delay. For example using the VOIP or online gaming at the same time takes lot of bandwidth. If you are constantly using your bandwidth heavily, you may want to upgrade your internet service.
answered 2 years, 10 months ago
Sonny19
-1point
0out of 1found this answer helpful.
answer 3
Open and close the disc tray. of course this may cause you not to hook up properly to your network but if you just want to watch a dvd/blu ray disc you should be fine.
answered 3 years, 2 months ago
pmarlea
-1point
0out of 1found this answer helpful.
answer 4
The load speed may be attributed to the Blu-ray player attempting to connect to your wireless router after it's initially turned on. This can take up to 30-60 seconds, depending on your network. Without that initial connection, you wouldn't be able to use the apps.

Unfortunately, at this time, there's no shortcut available to go directly to the Smart Hub option and directly access the apps.

--HDTech
answered 3 years, 2 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Why are the serial numbers so small. I needed glasses and a strong magnifier to read them.

asked 2 years, 11 months ago
gymrr
naperville, IL
on BD-D5700
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
Although I dont know why the s/n is so small, at least it is usually above the barcode on the back of the device :)
answered 1 year, 10 months ago
gobluealldaway
0points
0out of 0found this answer helpful.
answer 2
Amen.......very difficult to read the s/n. Threw the box out so I'm stuck with guessing. Surprised that Samsung doesn't have the information accesible in the menu system of the player.
answered 2 years, 8 months ago
mattkyron1
Minnesota
+2points
2out of 2found this answer helpful.
answer 3
You can look on the box and get the numbers you need! They are bigger on the box.
answered 2 years, 8 months ago
Peddler
Hartselle, AL.
0points
0out of 0found this answer helpful.
answer 4
I'm sorry to hear that you're having a hard time reading the serial numbers.

For some products, it may be because of the size of the product or the serial number plate. I'll be happy to have the appropriate department address this concern, as we attempt to continue to offer you a quality experience with Samsung products.

--HDTech
answered 2 years, 10 months ago
MisterSamsung
SamsungHQ
-1point
0out of 1found this answer helpful.
Question

I use this product to stream Netflix, and it will rebuffer several times throughout a movie.

How can I overcome this. I have broadband cable and an "N" router. Do you think it is the router or the cable company?
asked 2 years, 8 months ago
burny1970
Willow Street, PA.
on BD-D5700
0points
0out of 0found this question helpful.
4 answers
Answers
answer 1
Since my router is upstairs and my player was downstairs, it was not getting a strong signal. I purchased a signal booster that I put downstairs and it helped tremendously. I also upgraded my router that was several years old, and that too helped....no more buffering.
answered 1 year, 11 months ago
jrahrah
0points
0out of 0found this answer helpful.
answer 2
I had the same problem and yes it is very frustrating. I moved the blue ray player a few feet closer to the router. In my case three feet made the difference. After that slight change it worked fine. Hope this helps.
answered 2 years ago
NotFeliz
TX
0points
0out of 0found this answer helpful.
answer 3
Double check the speed of your network. In order to normally stream netflix, you need atleast 2.5mbps network speed and if you want full high definition you need atleast 5mbps and up network speed.
answered 2 years, 8 months ago
StrikeEagle
0points
0out of 0found this answer helpful.
answer 4
Double check your network speed. It should be atleast 2.5mbps to stream netflix and it should be atleast 5mbps if you want full high definition. Also check how far is your player to the router. Reposition it much closer to it as closer as possible free from any obstacles on the line of sight.
answered 2 years, 8 months ago
StrikeEagle
0points
1out of 2found this answer helpful.
Question

Wrong language on bluray player

I cant set it up because it has russian on it not english how do I get english????
asked 3 years, 7 months ago
bworwood
Utah
on BD-D5700
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
While your player is on standby mode just press and hold the stop button on the unit itself(not the remote) to put back your unit to its factory default settings. After that you'll see the initial setup and on screen language on the screen in english. So just choose the language that you prefer and do the other steps on the initial setup and you're good to go.(This works in 2010 and 2011 models of blurays and some Home Theater Systems)
answered 2 years, 8 months ago
StrikeEagle
0points
0out of 0found this answer helpful.
answer 2
You can choose your language in the settings menu. Choose settings (the one that looks like a cog) from the main menu and Language is the 5th option down.
answered 2 years, 10 months ago
pwilder
NC
0points
0out of 0found this answer helpful.
answer 3
turn on dvd player, select the green menu button on the remote or select the set up option on the main menu
answered 3 years, 4 months ago
nwaguy29
Wyckoff, NJ
0points
0out of 0found this answer helpful.
Question

Is there a code for my samsumg blue ray dvd remote control they will work with a vizio led tv

asked 3 years, 5 months ago
rob825
california
on BD-D5700
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
Look in your owners manual for the code.
answered 2 years, 8 months ago
Peddler
Hartselle, AL.
0points
0out of 0found this answer helpful.
answer 2
YES! Try 19, it worked first try on mine.
answered 2 years, 9 months ago
madsenfran
Illinois
+1point
1out of 1found this answer helpful.
answer 3
The chart listed in the owner's manual on Page 18 lists the television devices that are supported with Blu-ray remote control. The manufacturer you listed is not included on that list.

--HDTech
answered 3 years, 5 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

Direct TV remote

How do I find the code so I can operate the Blu Ray player with the Direct TV remote?
asked 3 years, 3 months ago
Udon
on BD-D5700
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
20199 Just found it online not to long ago.
answered 1 year, 8 months ago
ScoobySnacks
0points
0out of 0found this answer helpful.
answer 2
Use the HD User Manual or log on to DirecTV and look for remote control codes
answered 2 years, 9 months ago
ibdawg
ms
0points
0out of 0found this answer helpful.
answer 3
DirecTV would have to supply you with the code that they have assigned for Samsung devices.

They offer several different boxes, and the codes may vary from box to box. They would be able to assist further.

--HDTech
answered 3 years, 3 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

My bluray was working fine now I get no video? I get audio.

asked 3 years, 4 months ago
mrJohnnyk
home
on BD-D5700
+1point
1out of 1found this question helpful.
3 answers
Answers
answer 1
I have only found unplugging the blu-ray player and plugging it back in to work.
answered 2 years, 9 months ago
gmoney0320
Georgia
0points
1out of 2found this answer helpful.
answer 2
I have found that with mine I have to unplug it for about 5 minutes and plug it in. I think I have had half of the issues reported on here happen to me and that seems to fix it everytime. :( Not impressed.......
answered 2 years, 11 months ago
GuyStuff
Liverpool, NY
0points
1out of 2found this answer helpful.
answer 3
I'm sorry to hear that you're having this issue with your Blu-Ray player.

Have you tried adjusting the resolution on the player? It could be that the output resolution was inadvertently changed, and the video signal being sent to the TV isn't supported.

Try attaching the Blu-ray player to the TV using the yellow AV cable, switch the TV to the AV source, and see if you're able to access the Blu-Ray menu, change the resolution, and then switch back to the connection you were using before to see if that solves the problem.

--HDTech
answered 3 years, 4 months ago
MisterSamsung
SamsungHQ
-2points
0out of 2found this answer helpful.
Question

How do I reset the system so the hub is shown on the TV

Used to work fine. Then the other day when toggling the input to the DVD player it stopped showing the hub on the TV. When I press the Netflix button on the remote, the screen on the DVD player says "online" but nothing happens
asked 3 years ago
Indigo
Fairfield CT
on BD-D5700
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
Try unplugging the unit for a few minutes, then plug it back in. That should do it!!
answered 2 years, 8 months ago
Peddler
Hartselle, AL.
+2points
2out of 2found this answer helpful.
answer 2
I have a similar problem. But I have two very wide vertical black bars on the screen. I'm trying the unplugged reset as I type this
answered 2 years, 9 months ago
RfKing
0points
0out of 0found this answer helpful.
answer 3
Try unplugging the unit for 5 minutes, then plug it back in. This is what I have had to do since new.
answered 2 years, 11 months ago
GuyStuff
Liverpool, NY
+1point
1out of 1found this answer helpful.
Question

Will this play Region 2 DVDs, other international DVDs or only Region 1 DVDs?

asked 2 years, 11 months ago
mjlmd1
on BD-D5700
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
Sold in the U.S. will play only "Region 1" DVDs and "Region A" Blu-Ray discs.
answered 2 years, 8 months ago
Peddler
Hartselle, AL.
0points
0out of 0found this answer helpful.
answer 2
Typically all DVD and Blu ray players sold in the US will only play Region 1 DVD's and Blu Ray discs unless otherwise stated. If in doubt look on the back panel of your player and it will tell you which region discs it will play.
answered 2 years, 10 months ago
ElectronicsJunkieVA
0points
0out of 0found this answer helpful.
answer 3
Units manufactured for, and sold in the U.S. will play only "Region 1" DVDs and "Region A" Blu-Ray discs.

--HDTech
answered 2 years, 11 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

is there a tv control code for sylvania?

asked 3 years, 7 months ago
spetersluv
home
on BD-D5700
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Call Samsung and ask them, but I don't think there is one.
answered 2 years, 8 months ago
Peddler
Hartselle, AL.
0points
0out of 0found this answer helpful.
answer 2
Mine's a Sylvania also. When I called Samsung they said I would just have to use the TV's on /off or cable remotes on/off for the TV. If you find out the code (if there is one) please post it! Thanks.
answered 3 years, 4 months ago
CindyO
0points
0out of 0found this answer helpful.
Question

I would like to find out how I can access the Google web browser as shown on your website please.

as shown on your page http://www.samsung.com/us/article/apps-built-for-your-tv
asked 3 years, 7 months ago
Anonymous
broken arrow ok
on BD-D5700
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
I specifically bought the BD-D5700, 2011 Blu-ray player, understanding that it would have the web browser app as stated by HDTech... "The webpage referenced is highlighting the new apps that are available for 2011 Blu-ray players and televisions - HDTech." I set up my player and to my DISAPPOINTMENT, the 2011 BD-D5700 player DOES NOT have web browsing capabilities. Samsung, PLEASE release a firmware update!
answered 3 years, 6 months ago
DisappointedFrustrated
+2points
2out of 2found this answer helpful.
answer 2
At this time, there are no web browsers available for 2010 models. The webpage referenced is highlighting the new apps that are available for 2011 Blu-ray players and televisions.

--HDTech
answered 3 years, 7 months ago
MisterSamsung
SamsungHQ
-3points
0out of 3found this answer helpful.
Question

how to connect pc? The manual says to use Allshare but can't find it.

asked 3 years, 7 months ago
rozellejoyce
United States
on BD-D5700
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
once you have the wireless connected download from here---- allshare...
http://www.samsung.com/us/support/downloads/BD-D5700/ZA
and install to your computer,,add media into the shared folders then you can access allshare
from your blu ray
answered 2 years, 11 months ago
bestnametaken
+1point
1out of 1found this answer helpful.
answer 2
I saw a link somewhere on the samsung.com website to download allshare.
answered 3 years, 5 months ago
Rob66
0points
0out of 0found this answer helpful.
Question

Anyone having trouble with the wireless connect? Bad Wireless NIC?

Anyone having trouble with the wireless? I have fios (15mbps) and it constantly skips on Hulu plus and Netflix, but when I switch over and play the same movie on Netflix through my Xbox live (wireless also) it plays perfectly. Maybe I got a bad Wireless Nic?
asked 3 years, 7 months ago
jlshipp1
Baltimore, MD
on BD-D5700
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
wHEN YOU GO THRU THE WIRELESS SETUP YOU ARE ASKED FOR EITHER AN ip ADDRESS FOR A STATIC CONNECT, FOR A STATIC ADDRESS CONNECT, OR A DYNAMIC CONNECT THRU A DYNAMIC ADDRESS CONNECT. You may have to go thru your router setup if it is setup for MAC address screening and enter the MAC address for your Samsung device and then you will be asked to enter a "Key Code" which will act as your password to signin to your router wirelessly. Hope that helps.
answered 2 years, 10 months ago
BernieL
Paramus,NJ
-2points
0out of 2found this answer helpful.
answer 2
My wireless connect doesn't work well either. I can connect wirelessly to the Wii when the router is on another floor, but my BD-D5700 won't wirelessly connect even if the router is 2 feet away.
answered 3 years, 1 month ago
mvanoss
-2points
0out of 2found this answer helpful.
Question

Streaming MP4 from Home Server?

Is it possible to stream MP4s (or MKVs) from a Windows Home Server to my BD-D5700? Possibly with an available app? I'd love to be able to watch my movies on demand through my Samsung Blu Ray player.
asked 3 years, 7 months ago
dreadmador
on BD-D5700
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
go to the net and look up ( any video converter) or (you tube) read all info before u do so!!!! it helps you to convert ur video to other than mp4.
answered 3 years, 6 months ago
ijustwantaanswer
ijustwantaawnswer
0points
0out of 0found this answer helpful.
answer 2
I've been attempting to do this as well. What I've found so far is for a move to stream to the Blu Ray it has to be in Windows Media Player. Unfortunately WMP doesn't normally support that file type. There are some codecs available but I haven't had much luck using them. Also, if they were downloaded through iTunes they won't work even with the codec.
answered 3 years, 6 months ago
cgass177
Lynnwood, WA
0points
0out of 0found this answer helpful.
1 2 3 4 5 ... 75 next>>
Copyright © 1995-2014 SAMSUNG All rights reserved.