Search Samsung

Looking for Answers about samsung Wi-Fi Ready Blu-ray Disc™ Player?

Choose a Category
AppstoreApps(Q:636 A:259)
Battery(Q:1 A:0)
Chargers(Q:2 A:2)
Dishwashers(Q:17 A:26)
Dryers(Q:44 A:55)
Electric Ranges(Q:86 A:113)
French Door(Q:3 A:4)
Gas Ranges(Q:98 A:126)
Induction(Q:6 A:9)
LED Lighting(Q:2 A:3)
OTR(Q:119 A:173)
Pedestals(Q:8 A:7)
Side Vent Kit(Q:6 A:5)
Top Load Washers(Q:41 A:74)
UHD TV(Q:65 A:57)
Verizon Wireless(Q:109 A:125)
Washers(Q:25 A:38)
Water Filters(Q:14 A:14)
Shop now at Samsung
or
Choose a Category
See all Samsung Questions and Answers Bluray Players Q & A

Customer Questions & Answers for
Wi-Fi Ready Blu-ray Disc™ Player

Customer Questions & Answers:
1,845 Questions
 | 
464 Answers

Questions & Answers for samsung Wi-Fi Ready Blu-ray Disc™ Player

Question

internet@tv will not start.

asked 3 years, 4 months ago
butlerdh
Danvers Ma. USA
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
0 answers
Answers
This question currently has no approved answers.
Question

I own a samsung blueray player BD-C5500/XAA and when i tried to play the movie Avatar a screen came up saying I needed a upgrade ,how do I get one?

asked 4 years, 1 month ago
stevesandjhansen
on Wi-Fi Ready Blu-ray Disc™ Player
+1point
1out of 1found this question helpful.
8 answers
Answers
answer 1
I keep my player connected to the internet either by wireless router and the Samsung Wireless LAN Adapter or by direct plug-in when its close to my router. My player updates automatically whenever I put in a new movie (including Avatar). It can be a little annoying when I just want to watch a movie, but I always get the updates.
answered 2 years ago
MrGrim323
Madison, WI
0points
0out of 0found this answer helpful.
answer 2
Make sure you update your profile & are signed up for Samsung e-mail subscription service. They will automatically send you e-mails anytime there is a firmware update to!
answered 2 years, 2 months ago
onesmileynurse
Illinois
+1point
1out of 1found this answer helpful.
answer 3
Go to the support link, click on type of device, model information and you will be provided with links to download the updates you need. If you device is connected to the internet you can use the main menu and set up your unit to update automatically.
answered 2 years, 9 months ago
pkb001
Fremont, OH
+1point
1out of 1found this answer helpful.
answer 4
their are certain features on the avatar disc that require 2mb of storage that could be the problem you are having try to play the version without movie IQ
answered 2 years, 10 months ago
mojamit
0points
0out of 0found this answer helpful.
answer 5
The model of Samsung blu-ray player I have was not on your list of players. My Samsung blu-ray player model # is HT-BD2ET/xAA.
When I try to play the Avatar extended version blu-ray disc, it will not play-all other blu -ray discs play ok.
I called in Jan.2011 and was told that Samsung was aware of the problem and a fix would be available shortly.
I called again on March 2,2011 to see if the fix was available and no one heard of such a thing. In the meantime, I asked for and received a new firmware disc version 1.7-Avatar still does not play.
I am now returning the Avatar disc set.
Was there a fix for this Avatar problem and if so ,please send me the required firmware.
Thanks
answered 3 years, 7 months ago
majen73
0points
0out of 0found this answer helpful.
answer 6
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=US&CttFileID=2885857&CDCttType=FM&ModelType=C&ModelName=BD-C5500/XAA&VPath=FM/201010/20101026094813656/BSP-C5500WWB-1018.0.zip

That's the link I was given by tech support just a minute ago. I'm downloading now and will see if it'll do the trick. The website kept taking me in circles.
answered 3 years, 11 months ago
djgmix
0points
0out of 0found this answer helpful.
answer 7
I recently purchased the same model Blu-ray Player, and had the same "red screen" message when trying to play the Avatar Blu-ray movie disc. To download the latest Firmware for the U.S. version of the Player:
1. On the Blu-Ray Player itself, verify the version of Firmware that you have now. From the On-screen menu, go to "Settings", scroll down to Support, then to Software Upgrade to see your Current Version.
2. Make note of your Current Version so as to verify that the new Firmware version is for your model and version of Player. For example, if it starts with "BSP-C5500WWB", you want to make sure that your Firmware upgrade file has the same naming.
3. Go to the Samsung Main Page on the Internet, and click on the Support option at the top of the page.
4. Scroll down slightly and select "Blu-ray & DVD Players".
5. A smaller window appears for you to select "Bluray Players".
6. The next window frame will fill with the model numbers. Choose the BD-C5500/XAA if that is your model number and click Select.
7. The next screen confirms your model number. Click on "Get Downloads" to see what is available.
8. At the Download Center, scroll down to see that for your model there will be User Manuals and Firmware to select. Click on the "Firmware" tab.
9. The first item is the actual Firmware upgrade. The next two items are Guides on how to install the Firmware upgrade depending on whether you choose the USB Flash Drive method or the Burn-to-CD method.
10. Decide on which method you feel more comfortable doing, then click on the Adobe PDF symbol to download to read and print the appropriate Guide so you know what to do.
11. Click on the Zip symbol next to the Firmware File to begin the download process. Create a folder to have the file located where you can find it later.
12. The Firmware file size is approx. 61MB in size, so it may take some time to download, depending on your broadband speed.
13. The file arrives in compressed "Zip" format. Once fully downloaded, you will need to unzip this file to be able to use. Hopefully you can right-click on the file name and see options to accomplish this. Try to save the unzipped file in the same folder that you are using.
14. The unzipped file should be named similar to your Current Version of Firmware as noted above in Step 2, with a higher number at the end. The file extension should be "RUF". If none of these fit the naming for your downloaded unzipped file, DO NOT USE as it may cause damage to your Player's operation if installed!
15. Copy the unzipped RUF file to a USB Flash Drive, or use software on your PC to select the RUF file and create a CD-R with this file only. (I did the create and burn a CD-R method).
16. Take the USB Flash Drive or CD-R disc to your Blu-ray Player (with your TV on to watch), and follow your instructions received from Step 10 above to install the Firmware upgrade to your Player.
17. Be patient with this process and do not interrupt! It takes a few minutes to accomplish this Firmware upgrade.
18. After the last Power Off, remove the disc or flash drive, and then Power On your Player.
19. Review that the Firmware upgrade was installed by re-visiting your Current Version settings as in Step 1 above.
20. Once verified that the upgrade was successful, load up your Avatar Blu-Ray disc to see if it works. You may still get a "black screen" message regarding an update, but it should proceed to the Movie Disc Menu in a few seconds.
21. Prepare to be WOW'ed!!
answered 4 years, 1 month ago
PerSue
+1point
1out of 1found this answer helpful.
answer 8
contact customer service 800 number. they will get your address and mail an update cd. they said there is a problem with the server not releasing the most current firware update. this will take nine business days.
answered 4 years, 1 month ago
prissysox
Louisville, KY
+2points
2out of 2found this answer helpful.
Question

I can not establish a connection between my home wireless network and the blueray player, what am I probably not doing correctly?

asked 4 years, 1 month ago
Trytoupdate
IN
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
6 answers
Answers
answer 1
Read the manual carefully, if you mess up one step it won't work. Make sure you do this step by step.
answered 2 years, 11 months ago
Koreanmale12
0points
0out of 0found this answer helpful.
answer 2
I had the same problem - broadcast was disabled, security setup, 5GHz was the only bandwidth for N only.
I spent 2 hours trying everything. Since other media player was working find with WAP, I knew that WAP is working fine. I reset to factory settings and verified that WAN adapter makes connection - success. Then, step by step I changed security, bandwidth, protocol and other settings testing WAN adapter connection after every change. Once everything was working fine, I disabled advertising and WAN adapter still was able to see WAP and make connection.
answered 3 years, 9 months ago
compumon
Rocky Mount, NC
0points
0out of 0found this answer helpful.
answer 3
1.My player not show wireless connection-only wired
2.In a wired connection show Mac address,but IP address in IPS have,but when I test-they not connected
3.I try wireless connected,but in menu not have this connection...
answered 3 years, 9 months ago
Grigoriy
Plano TX
0points
0out of 0found this answer helpful.
answer 4
Why is it, then, that one gets the following when checking the compatibility of the LinkStick Wireless USB 2.0 AdapterWIS09ABGN with the BD-C5500 Blu-Ray at http://www.samsung.com/us/video/tvs-accessories/WIS09ABGNX/XAA ?

Your Product is not compatible!
This accessory is not guaranteed to work with your Product.
answered 3 years, 10 months ago
dcivco
Connecticut
0points
0out of 0found this answer helpful.
answer 5
Is it connected to your router? To connect with any computer on your network you need samsung pc share manager installed on the computer you want to share files with.
answered 3 years, 11 months ago
doofus88
tc
-1point
0out of 1found this answer helpful.
answer 6
first you need to plug in your LinkStick Wireless USB 2.0 Adapter Model #: WIS09ABGNX/XAA
(sold seperatly) Then if you have a secure network you will have to enter your password, and that should be it.
answered 4 years, 1 month ago
drew79
IN
+1point
1out of 1found this answer helpful.
Question

Software Upgrades

When we try to do a software update we get an error message, model information in upgrade file does not match with your player. Please check and try agian. We have checked and rechecked all of the settings and we are unable to get any updates to download. Does anyone have any anwsers or suggestions?
Thank you
asked 4 years, 1 month ago
lowetn
on Wi-Fi Ready Blu-ray Disc™ Player
0points
1out of 2found this question helpful.
3 answers
Answers
answer 1
You need a Wi Fi adapter to connect with your computer.
answered 3 years, 10 months ago
misterzero1
-2points
0out of 2found this answer helpful.
answer 2
you need to call customer service. they will get your address and mail you an update cd. they said that the servers werent releasing the newsest firmware update. expect it to take nine business days for the cd to be mailed to you
answered 4 years, 1 month ago
prissysox
Louisville, KY
0points
1out of 2found this answer helpful.
answer 3
I had this happen also, however it didn't happen until I had already updated to the latest software. I tried again several times, it fianlly just stopped giving me this message, and said you have the latest software avalible.
answered 4 years, 1 month ago
drew79
IN
0points
0out of 0found this answer helpful.
Question

We own 2 samsung blu-Ray players and are not getting sound on either one when using netflix instant view.

Sound is fine for discs in bluRay and for all other modes on both systems (cable, etc.). Can get video on netflix but not sound. Other devices (computers and ipads) can play netflix instant with sound on same network/same location. How do we diagnose?
asked 4 years ago
Amylitz
Pa
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
In my experience, sometimes if there is a DVD or Blu-Ray Disc inserted, Netflix will not play with sound. My workaround has been to eject any DVDs or Blu-Ray Discs and then trying again. This has always worked for me. I do wish for an update that would fix this, but the workaround isn't too onerous and seems to work 100% of the time.
answered 2 years, 11 months ago
Anonymous
San Francisco CA
0points
0out of 0found this answer helpful.
answer 2
I find if I play a DVD and then try to go to Netflix , my audio drops out. I have to go into Pandora, and that clears the audio. Then I can play Netflix with audio.

Hope Samsung can fix this.
answered 3 years, 7 months ago
MitchFlorida
0points
0out of 0found this answer helpful.
answer 3
I have an issue where the Netflix sound will only play out of the analog ports instead of the hdmi. It happens a couple times a week. I have reset the player, but it still happens. The only way I have found to get the sound to work again out of the HDMI is to open the "Texas Holdem" app. This application seems to redirect the sound back to the HDMI cable. Netflix seems to not be setting the audio ports correctly itself.
answered 3 years, 8 months ago
Joe85
0points
0out of 0found this answer helpful.
Question

Setting TV code in remote

Is there a TV code to control a Vizio 42" LCD TV
asked 4 years ago
Roylz
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
please provide code for a TV LED UN46D8000 and a Blu-Ray player, BD-D5500.
Thank you.
answered 3 years, 4 months ago
sfltci736
san francisco
0points
0out of 0found this answer helpful.
answer 2
Yes "19 "
answered 4 years ago
doofus88
tc
0points
0out of 0found this answer helpful.
answer 3
Use 1he number 19 that will enable volume and channel
answered 4 years ago
doofus88
0points
0out of 0found this answer helpful.
Question

Why do I have to activate Netflix every time I turn on Blu-Ray Player

Every time I turn on my TV and Blu-Ray player, the Netflix activation appears to be lost. Each time I click on Netflix, it takes me through the activation process. Does this happen to anyone else?
asked 4 years ago
samsungak
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
This is my chat log with a TECH and instructions... This should work:
--------------------------------------------------------------------------------------------
Stanford: Hi, thanks for reaching out to Samsung tech support. How can I help you today?

Visitor: I have a BD player C5500... The unit seemed to work well with netflix (NF) when I got it then there were updates and since then it had been acting like the device is not registered with Netflix more and more oftern (From once every week- to every day). If I look in the device properties it says that I'm activated with NF, then when I try to connect it acts like I'm not connected. Is this a common thing and is there a fix for it?

Stanford: For how long you are facing the issue?

Visitor: past 6 months, it worked well for the first 2months

Stanford: Let us check the Current Firmware Version installed on the Player.

Stanford: With the disc tray open, press and hold the INFO button on the remote control. The System Information appears on the screen.

Visitor: S/W: BSP-c5500WWB-1018.0

Stanford: I see that your Blu-Ray Player is having an older Firmware update.

Visitor: also the unit has been starting NF movies without sound and I've had to start somthing else first (pandora or a DVD) to get the sound working... Then use NF

Visitor: Can we update the firmware???

Stanford: I recommend you update the Blu-Ray Player with the latest Firmware.

Stanford: Please click on the link given below:

Stanford: http://downloadcenter.samsung.com/content/FM/201011/20101112175543281/BSP-C5500WWB-1019.0.zip

Stanford: Please click on the link given below to check with the instructions:

Stanford: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view_us.jsp?SITE_ID=1&PG_ID=0&AT_ID=134065&PROD_SUB_ID=0&PROD_ID=839&EMAIL_ID=

Visitor: standy

Stanford: Okay.

Visitor: so this will not happen over Ethernet port? Those updates don't work?

Stanford: Yes, the update cannot be done through Ethernet port.

Visitor: if I would have known that I would have tried that first... Sorry

Stanford: As per the latest Firmware the issue would be resolved.
answered 3 years, 11 months ago
MPizzle
Seattle
0points
0out of 0found this answer helpful.
answer 2
This happened to me the second time I tried to use Netflix. I've used it many times since without having to reactivate.
answered 4 years ago
mjbupp
Pittsford, NY
0points
0out of 0found this answer helpful.
answer 3
This is now working reliably for me. I'm unsure of exactly why, but here is my guess.

This issue was occuring because each time I started up the Blu-Ray player, I was clicking on the Netflix icon before clicking on internet@TV. I believe that clicking on the top Netflix icon before starting up the Internet@TV interface caused the player to think that it was always the first time accessing Netflix.

Now, when I start up the Blu-ray player, I first click on Internet@tv, the system connects, and then I click on Netflix.

It has been working without issues since then, so that is my best suggestion for a fix for anyone else thinking they have the "Netflix activation bug".
answered 4 years ago
samsungak
0points
0out of 0found this answer helpful.
Question

I am wanting the pc software for allshare. I have windows 7. Will the XP/Vista work?

asked 4 years, 1 month ago
Tmacd94
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
I am using both PC Share Manager and Samsung Allshare. The Allshare seems to be more stable
answered 2 years, 5 months ago
PieDaDDY
Brooklyn, NY
0points
0out of 0found this answer helpful.
answer 2
Live chat say's NO
answered 3 years, 9 months ago
ddula
nc
0points
0out of 0found this answer helpful.
answer 3
Yes it will make make sure its version 4.2
answered 3 years, 11 months ago
doofus88
tc
0points
0out of 0found this answer helpful.
Question

My blu ray disc won't connect to the internet-saying physical connection only

it is saying there is a physical connection only- all of our laptops are able to access the internet wirelessly so the problem is only with the blu ray disc player
asked 4 years ago
careyt12879
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
I just had this same problem, it turns out that when I did a firmware upgrade on my netgear router, Samsung adapter went bye-bye, all my other wireless and wired netwerks were fine, just not Samsung. So I downgraded the firmware to what is was and now the Samsung adapter works, WOW, what a nightmare!
answered 3 years, 8 months ago
acucrack
Michigan
-3points
0out of 3found this answer helpful.
answer 2
I have the same problem, even after inserting Samsung Wireless LAN Adaptor (Model WIS09ABGN2) in my BD-C5500 Blu-Ray. Setup instructs me to "... verify that a Samsung Wireless Adaptor is Connected" and does allow me to proceed further.
answered 3 years, 10 months ago
dcivco
Connecticut
0points
0out of 0found this answer helpful.
answer 3
The BD-C5500 is by default a wired connection for Internet@TV and other online applications. If you'd like to make the BD-C5500 a wireless device, you'll need the Samsung WIS09ABGN LinkStick.

--HDTech
answered 4 years ago
MisterSamsung
SamsungHQ
-2points
0out of 2found this answer helpful.
Question

why is the Netflix app limited to only Instant Play

The Wii app and other Blu Ray players are able to browse the Netflix selections and then play without needing to use a computer to add titles to the instant play list
asked 3 years, 11 months ago
gophers98
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
You just need to download the latest update.
answered 2 years, 11 months ago
drew79
IN
0points
0out of 0found this answer helpful.
answer 2
Netflix is 'trying to steer away from the main focus being the DVD's to more streaming. So, they aren't making it available except from their site on the pc.
answered 3 years, 6 months ago
Sknxvll
0points
0out of 0found this answer helpful.
answer 3
not any more new update fixes that.
answered 3 years, 11 months ago
doofus88
tc
0points
0out of 0found this answer helpful.
Question

How do I prevent an instant movie from stopping and then stating that it is "re-buffering?"

When I watch some instant movies, the movie will stop and I see a line that says "re-buffering" or it just disconnects from the site. Usually, it just drops out of the movie and has to "re-buffer." I have tested the wireless transmission speed (I use a wireless LAN Adapter to connect to my Network), and it checks out fine.
asked 3 years, 8 months ago
Anonymous
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
3 answers
Answers
answer 1
I have also seen older routers have been causing and issue also
answered 2 years, 4 months ago
BlazingU
0points
0out of 0found this answer helpful.
answer 2
You may also consider upgrading your internet speed with your service provider.
answered 2 years, 11 months ago
mike611
Toledo, OH
0points
0out of 0found this answer helpful.
answer 3
There is not a way to adjust the buffering of a streaming movie. The reason that the player may buffer could be due to network traffic, neighborhood network speeds, or could even be dependent on the server from which you are streaming from. At this time, for most of the apps, there's no way to adjust the buffer stream.

--HDTech
answered 3 years, 7 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

How can I get AAC (itunes) music files to play via blu ray player

asked 4 years, 1 month ago
corpseman
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
If the files are protected AAC files, they may not play anyway due to Digital Rights Management restrictions on the files. I've tried playing those digital copies of movies you get with some blu rays and they play fine on the computer but won't stream to the blu ray player.
answered 3 years, 8 months ago
Larysius
0points
0out of 0found this answer helpful.
answer 2
the latest firmware broke this, you'll have to wait for samsung to fix it in another firmware
answered 3 years, 10 months ago
Screwyluie
0points
0out of 0found this answer helpful.
Question

cannot connect to internet

Have tried auto and manual setup stops at gateway ping
asked 4 years, 1 month ago
bj647
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Verify the network setting in the BD-C5500, in the DNS server section try other IP from your internet service provider. In my case I had 2 IP address and my bluray player always get the first one, and this address was not working. When I put the second DNS server number is working properly and the device connect with the internet.
answered 3 years, 1 month ago
IronMan15
Isabela, Puerto Rico
0points
0out of 0found this answer helpful.
answer 2
More than likely, this means you are not connected to the access point. you need to ensure you have entered the SSID correctly (it is case sensative) and that you are choosing the correct security model (WPA, WPA2-PSK).

Also, check to ensure your router is acting as a DHCP server. Otherwise, Auto on your Samsung will not work.
answered 3 years, 10 months ago
jsim
0points
0out of 0found this answer helpful.
Question

netflix browsing

i can only access netflix queue on my blu ray player. i cannot access the entire available films on my blu ray player. i can access the entire library on my computer and on my nintnedo wii. i have friends who have a blu ray player, and they can access the entire available library on their player. i can only access what is only in my netflix queue. how can i access the entire netflix library from my blu ray player?
asked 4 years ago
drlow
redlands
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Just updated my firmware today for the C5500 and am now able to browse and search the entire Netflix library
answered 3 years, 10 months ago
airshep2
NJ
0points
0out of 0found this answer helpful.
answer 2
Currently you will only be able to access your Netflix queue with titles you have saved online through your PC. However, we hope to change this very soon and will be do so in the coming month. Stay tuned!
answered 4 years ago
Bluray
0points
0out of 0found this answer helpful.
Question

HOW CAN I GET THE ROV TV LISTINGS TO PLAY?

WHEN I SELECT A CHANNEL IT DOES NOT PLAY
asked 4 years ago
SEANCB
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
you can't its not interactive!
answered 4 years ago
doofus88
0points
0out of 0found this answer helpful.
answer 2
ROVI is a program that allows you to see what local channels are available in your area. They don't connect to the tuner, but give you a listing of what programming is coming up in real time.

Thanks for your support of Samsung products!

--HDTech
answered 4 years ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

WHY DOES MY BLU RAY ASK FOR AN UPDATE?

asked 4 years ago
DPCU
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
your bulray ask for an update due to official change in the database of your bulray frimware.this can be done in two ways one via USB flash drive or direct air update in th bulray system.
answered 3 years, 10 months ago
dahaldn21
chicago
0points
0out of 0found this answer helpful.
answer 2
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=US&CttFileID=2885857&CDCttType=FM&ModelType=C&ModelName=BD-C5500/XAA&VPath=FM/201010/20101026094813656/BSP-C5500WWB-1018.0.zip

Try this link. It'll download to your PC and then you'll have to transfer to your player via flashdrive. The guy told me to clear out EVERYTHING on the flashdrive, too.
answered 3 years, 11 months ago
djgmix
0points
0out of 0found this answer helpful.
Question

Will any usb wifi adaptor work with the BD-C5500 Blu-ray player, or is the a specific list of supported adaptor?

asked 3 years, 11 months ago
ericsman
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
EnGenius EUB9801 IEEE 802.11a/b/g, IEEE 802.11n Draft 2.0 USB 2.0 Dual-Band Wireless Adapter Up to 300Mbps Wireless Data Rates 64/128-Bit WEP, WPA, WPA2

Does Not Work with BD-C5500 - Confirmed
answered 3 years, 7 months ago
briganomics
Walnut creek, CA
0points
0out of 0found this answer helpful.
answer 2
any should work fine
answered 3 years, 10 months ago
Screwyluie
0points
0out of 0found this answer helpful.
Question

what is the remote code for a Vizio tv

asked 3 years, 11 months ago
me319
Iowa
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
Try 19 or 78 those two control everything but the input selection on my Vizio
answered 3 years, 3 months ago
mandm2003
Iowa
0points
0out of 0found this answer helpful.
answer 2
Not all manufactures will have codes that are represented in the owners manual. We offer the codes for a large array of television manufacturers, and while we are able to offer a wide selection, not all manufacturers or all products will be available.

In this case this particular manufacturer is not supported, as codes are not available in the manual.

--HDTech
answered 3 years, 6 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
Question

yahoo app?

for bd-c5500
asked 3 years, 11 months ago
krapykorn1
reno
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
It is my understanding that new apps are available often, so keep checking.
answered 2 years, 11 months ago
mike611
Toledo, OH
0points
0out of 0found this answer helpful.
answer 2
what you see is what you get
answered 3 years, 10 months ago
Screwyluie
0points
0out of 0found this answer helpful.
Question

Is there a code for programming the BC-C5500 remote to a Visio TV?

asked 3 years, 7 months ago
w6142
Portland, OR
on Wi-Fi Ready Blu-ray Disc™ Player
0points
0out of 0found this question helpful.
2 answers
Answers
answer 1
19 and 78 do everything but the input selection on my Vizio
answered 3 years, 3 months ago
mandm2003
Iowa
0points
0out of 0found this answer helpful.
answer 2
Not all manufactures will have codes that are represented in the owners manual. We offer the codes for a large array of television manufacturers, and while we are able to offer a wide selection, not all manufacturers or all products will be available.

In this case this particular manufacturer is not supported, as codes are not available in the manual.

--HDTech
answered 3 years, 6 months ago
MisterSamsung
SamsungHQ
0points
0out of 0found this answer helpful.
1 2 3 4 5 ... 93 next>>
Copyright © 1995-2014 SAMSUNG All rights reserved.