Looking for Answers about samsung B2330HD?

Use the following sequence: Product Group: OFFICE, Category: MONITORS, Sub-Category: SPECIALTY, Model Name: B2330HD, Model Code: LS23PTNSF/ZA then supply the serial number and SUBMIT.

I think the B2330HD has a built in HDTV tuner and the B2330 doesn't.

The screws you need are M4 x 0.5 which are nearly impossible to find. Most wall mounts come with the standard M4 x 0.7 screws. What I did was buy an M4 x 0.7 drill bit and carefully drilled the hole bigger so the M4 x 0.7 screws would fit. Sounds crazy but I was desperate at the moment and was actually suprised that it fixed the problem.

Check on the video memory, or try to lower the resolution on your computer, sometimes the video memory is not enough.

They actually are but not meant for the standard M4 x 7.0 screws. They take M4 x 0.5 screws which are impossible to find. Believe me. What I did was drill it with an M4 x 7.0 drill bit which I purchased from OSH. You can also find them online. Good luck.

MENU DESCRIPTION
Source List Use to select <PC>, <TV> or an external input source connected to the Monitor. Use to select the
screen of your choice.
You can use the [SOURCE] button on the remote control.
<PC> - <TV> - <AV> - <Component> - <HDMI1> - <HDMI2> - <USB>
Edit Name Name the input device connected to the input jacks to make your input source selection easier.
<VCR> - <DVD> - <Cable STB> - <Satellite STB> - <PVR STB> - <AV Receiver> - <Game> -
<Camcorder> - <PC> - <DVI PC> - <DVI Devices> - <TV> - <IPTV> - <Blu-ray> - <HD DVD> -
<DMA>
When a PC with a resolution of 1920 x 1080@60Hz is connected to the [HDMI (DVI) IN] port,
you should set the <HDMI> mode to <DVI PC> in the <Edit Name> of the <Input> mode. In this
case, a separate sound connection is required.

You may need to replace your video card to one with more video memory, the computer is probably setting the resolution to where your video card memory can support, if that is not the case try to update your drivers.

I'm not sure what Samsung model you have. The following procedure will work with most models:

Press the volumn button on the TV. When the volumn OSD is displayed, Press and hold the [MENU] button on the TV for 5 seconds.

Hope this helps.

You can't. Sound output is minimal.

When you register you must select as Office use and as a Monitor.

Try to play with your resolution settings on your video card. if that does not work try to update your drivers.

metric size M4 but not the standard pitch 0.7, try pitch 0.5

On your remote, push MENU, scroll down to PLUG AND PLAY, push the right arrow and scroll down to PIP push the right arrow again and then push ON, and your ready to go

Setting up dual monitors is a function of the PC's operating system located (for Windows) in the Display Properties, Settings tab

Thank you for contacting Samsung. You can find all the parts and accessories to your product here: http://www.samsungparts.com/Products/Parts_and_Accessories/B2330HD/Default.aspx

Thank you for being a Samsung customer!

The Samsung Online Support Team

Thank you for contacting Samsung. I understand your situation. Unfortunately, there is currently no way to remove products from your account. We apologize for the inconvenience. Thank you for being a Samsung customer!

The Samsung Online Support Team